TM Application Specific Crystal Oscillator 7.0 x 5.0mm SN10GE156 3.3V PECL Low Jitter 156.25MHz 10GbE XO ASSP XO™ for Networking 7.0 x 5.0mm Ceramic SMD Package: Product Features Recommended Land Pattern: • Very low phase jitter - 0.5ps RMS • Thicker crystal for improved reliability • Pb-free & RoHS compliant • Industrial temperature range Product Description The SN Series 3.3V, 156.25MHz crystal clock oscillator achieves superb jitter for 10GbE applications. The output clock signal, generated internally with a patented oscillator design, is compatible with LVPECL logic levels. The device, available on tape and reel, is contained in a 7.0 x 5.0mm surface-mount ceramic package. Pin Functions: Applications • 10 Gigabit Ethernet Network Interface Card (NIC) Pin Function 1 OE Function 2 N/C 3 Ground 4 OUT 5 OUT 6 VCC • 10 Gigabit Ethernet Switch/Router • 10 Gigabit Ethernet PHY Module *Extended high frequency power decoupling is recommended (see test circuit for minimum recommendation). To ensure optimal performance, do not route RF traces beneath the • Serial Attached iSCSI package. Part Ordering Information: SN10GE156 SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.pericom.com 10-0020 All specifications are subject to change without notice. SN10GE156 Rev C 04/09/10 1 3.3V PECL Low Jitter 156.25 MHz 10GbE XO SN10GE156 TM Application Specific Crystal Oscillator 7.0 x 5.0mm Electrical Performance Parameter Min. Typ. Output Frequency Max. Units 156.25 Supply Voltage 2.97 MHz 3.30 3.63 V 55 70 mA 25 mA Supply Current, Output Enabled Supply Current, Output Disabled Frequency Stability Operating Temperature Range ±50 ppm See Note 1 below +85 °C Industrial VCC – 1.620 V 0 to +85°C -40 Output Logic 0, VOL V VCC – 1.555 Output Logic 1, VOH Notes -40 to 0°C VCC – 1.025 V 0 to +85°C VCC – 1.085 V -40 to +0°C Output Load output requires termination 50Ω to VCC – 2V Duty Cycle 45 55 % Measured 50% V DD Rise and Fall Time 0.3 0.6 ns Measured 20/80% of waveform Jitter, Phase RMS (1-σ) 0.25 0.5 ps 12 kHz to 20 MHz frequency band 25 40 ps 100,000 random periods Jitter, pk–pk Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C), aging (5 year at 40°C average effective ambient temperature), shock and vibration. 2. For specifications othere than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Input Voltage (pin 1), Output Enable Typ. Max. Units 2.2 Input Voltage (pin 1), Output Disable (low power standby) Internal Pullup Resistance 0.8 50 Notes V or open V Outputs disabled to Hi-Z kΩ Output Disable Delay 200 ns Output Enable Delay 10 ms Absolute Maximum Ratings Parameter Storage Temperature Min. Typ. -55 Max. Units +125 °C Notes For the latest product information visit: http://www.pericom.com/products/timing/oscillators/SN10GE156/ For test circuit go to: http://www.pericom.com/pdf/sre/tc_pecl.pdf For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf For typical phase noise go to: http://www.pericom.com/pdf/sre/pn_SN10GE156.pdf For tape and reel information go to: http://www.pericom.com/pdf/sre/tr_7050.pdf SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.pericom.com 10-0020 All specifications are subject to change without notice. SN10GE156 Rev C 04/09/10 2