FEATURES PETERM ANN TECHNIK - HIGH RELIABILITY FOR LOW COST - TIGTH TEMPERATURE STABILITY POSSIBLE - EXTENDED TEMPERATURE RANGE TO -40/+105°C Time & Frequency Components - EXCELLENT CLOCK SIGNAL GENERATUR FOR CPU'S - CHEAPEST AVAILABLE CRYSTAL WITH TIGTH TOLERANCES UP TO 200.0 MHz SERIES STANDARD NUMBER OF LEADS OPTION UM1 UM5 2 LEADS 2 LEAD 3 LEADS 3 LEAD SMD GULL WING WITH METAL JACKET FREQUENCY RANGE FOR UM-1 AND UM-5 MODE OF VIBRATION RESONANCE RESISTANCE 6.0 ~ 45.0 MHz 30.0 ~ 100.0 MHz 80.0 ~ 155.0 MHz 120.0 ~ 200.0 MHz AT-FUNDAMENTAL 60 Ω MAX. 3rd OVERTONE 60 Ω MAX. 5th OVERTONE 80 Ω MAX. 7th OVERTONE 120 Ω MAX. FREQUENCY TOLERANCE AT 25°C +-5 PPM ~ +-15 PPM TEMPERATURE RANGE 0/+50°C ~ -40/+85°C TEMPERATURE STABILITY +-3 PPM 0+50°C / -10/+60°C +-5 PPM 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C +-10 PPM +-20 PPM 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C +-30 PPM 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C +-50 PPM 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C LOAD CAPACITANCE 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C 6 ~ 100 PF OR SERIES SHUNT CAPACITANCE 7 PF MAX. DRIVE LEVEL 100 µW typical AGING (0.01 mW ~ 2 mW possible) +-3 ~ +-5 PPM PER YEAR (+-1 PPM POSSIBLE) INSULATION RESISTANCE >500 MΩ DC/100V +-10% STANDARD DELIVERY FORM BULKS TAPE AND REEL (1.000 PCS PER REEL) OPTION INSULATOR (NOT STANDARD FOR SMD-VERSION) OPTION WITHOUT INSULATOR WITH INSULATOR OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION PART NUMBERING SYSTEM EXAMPLE UM1-SMD 27.000 MHz 5/5/-10+60/20pF/T TYPE NUMBERS OF LEADS FREQUENCY OSCILLATION MODE FREQUENCY TOLERANCE AT 25°C TEMPERATURE STABILITY TEMPERATURE RANGE LOAD CAPACITANCE DELIVERY FORM INSULATOR (NOT FOR SMD-VERSION) UM1 OR UM5 BLANK FOR 2 LEAD -3 FOR 3 LEADS -SMD FOR SMD-VERSION OF UM1 IN MHZ NUMBER OF MODE IF SOMETHING ELSE THAN SPECIFIED IS REQUIRED REQUIRED VALUE REQUIRED VALUE REQUIRED VALUE REQUIRED VALUE BLANK FOR BULKS T FOR TAPE AND REEL BLANK = WITHOUT INSULATOR I = WITH INSULATOR PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected] PETERMANN TECHNIK Time & Frequency Components OUTLINE DRAWING OF UM1 6.9+0.2 - OUTLINE DRAWING OF UM5 2.2+0.2 - 6.0max 2.2+0.2 - 20max 20max 7.8+0.2 - 6.9+0.2 - 00.35+0.05 - 00.35+0.05 - 3.75+0.2 - 3.2+0.2 - 3.2+0.2 - 3.75+0.2 - Unit:mm 7.8+0.2 - OUTLINE DRAWING OF UM1-3 6.9+0.2 - OUTLINE DRAWING OF UM5-3 2.2+0.2 - 6.9+0.2 - 2.2+0.2 - 20max 6.0+0.2 - 7.8+0.2 - 20max Unit:mm 7.8+0.2 - 3-00.35+0.05 - 3-00.35+0.05 - 3.75+0.2 - 3.2+0.2 - 3.2+0.2 - 3.75+0.2 - Unit:mm 7.8+0.2 - 7.8+0.2 - 1.45+0.1 - OUTLINE DRAWING OF UM1-SMD 12.7max 4.8max 1.3+0.2 - 3.75 2.5+0.5 - 3.3max 8.1max 2.8+0.1 - Unit:mm 8.0max PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected] Unit:mm