PFS FR105

FAST RECOVER RECTIFIER
VOLTAGE RANGE
CURRENT
FR101 THRU FR107
50 to 1000 Volts
1.0 Ampere
DO-41
FEATURES
•
•
•
•
•
Low coat construction
Fast switching for high efficency.
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed:
260℃/10 secods/.375”(9.5mm)lead length at 5 lbs(2.3kg) tension
.034(0.9)
.028(0.7)
1.0(25.4)
MIN.
.205(5.2)
.160(4.2)
MECHANICAL DATA
•
•
•
•
•
•
DIA.
.107(2.7) DIA.
.080(2.0)
Case: Transfer molded plastic
Epoxy: UL94V-O rate flame retardant
Polarity: Color band denotes cathode end
Lead: Plated axial lead, solderable per MIL-STD-202E method 208C
Mounting position: Any
Weight: 0.012 ounce, 0.33 grams
1.0(25.4)
MIN.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
•
•
•
Ratings at 25OC ambient temperature unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load
For capacitive load derate current by 20%
SYMBOLS
VRRM
VRMS
VDC
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
0.375”(9.5mm) lead length at T A= 75℃
Peak Forward Surge Current
8.3mS single half sine wave superimposed on
rated load (JEDEC method)
Maximum Instantaneous Forward Voltage @ 1.0A
Maximum DC Reverse Current at Rated
DC Blocking Voltage
TA = 25℃
TA = 100℃
Maximum Reverse Recovery Time (Note 3) T J=25℃
Typical Junction Capacitance (Note 1)
FR101
50
35
50
FR102
100
70
100
FR103 FR104 FR105 FR106
200
400
600
800
140
280
420
560
200
400
600
800
FR107
1000
700
1000
UNITS
Volts
Volts
Volts
I(AV)
1.0
Amp
IFSM
30
Amps
VF
1.3
5.0
100
Volts
IR
trr
CJ
150
µA
15
250
500
ns
pF
Typical Thermal Resistance (Note 2)
RθJA
50
℃/W
Operating Junction Temperature Range
TJ
TSTG
(-55 to +150)
(-55 to +150)
℃
Storage Temperature Range
Notes:
1.Measured at 1.0MHz and Applied Reverse Voltage of 4.0Volits.
2 Thermal Resistance from junction to Ambient at .375”(9.5mm)lead length, P.C.board mounted.
3.Reverse Recovery Test Conditions:If=0.5A,Ir=1.0A,Irr=0.25A
Web Site: WWW.PS-PFS.COM
℃
FAST RECOVER RECTIFIER
VOLTAGE RANGE
CURRENT
FR101 THRU FR107
50 to 1000 Volts
1.0 Ampere
RATING AND CHRACTERISTIC CURVES FR101 THRU FR107
FIG.2-MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
FIG.1-TYPICAL FORWARD CURRENT
DERATING CURVE
30
0.8
0.6
0.4
Single Phase
Half Wave 60Hz
Resistive or
0.2
Inductive Load
0.375"(9.5mm)Lead Length
0
0
25
100
75
50
125
150
8.3ms Single Half Sine-Wave
(JEDEC Method) Tj=Tjmax
CURRENT, (A)
PEAK FORWARD SURGE
1.0
(A)
AVERAGE FORWARD CURRENT,
1.2
20
10
0
175
1
INSTANTANEOUS REVERSE CURRENT,
(mA)
10
1.0
0.1
Tj =25° C
Pulse Width=300us
1% Duty Cycle
1.2
1.4
1.6
1.8
40
20
60 80 100
10
Tj =100° C
1.0
Tj =25° C
0.1
0
0.01
1.0
10
100
20
(A)
INSTANTANEOUS FORWARD CURRENT,
FORWARD CHARACTERISTICS
0.8
8
FIG.4-TYPICAL REVERSE
CHARACTERISTICS
FIG.3-TYPICAL INSTANTANEOUS
0.6
6
4
2
NUMBER OF CYCLES AT 60 Hz
AMBIENT TEMPERATURE, (° C)
40
20
60
120
100
80
140
PERCENT OF RATED PEAK
2.0
REVERSE VOLTAGE,(%)
INSTANTANEOUS FORWARD VOLTAGE,(V)
FIG.5-TYPICAL JUNCTION CAPACITANCE
FIG.6-TEST CIRCUIT DIAGRAM AND
REVERSE REXOVERY TIME CHARACTERISTIC
100
CAPACITANCE,(pF)
+0.5A
50Ω
NONINDUCTIVE
10Ω
NONINDUCTIVE
(-)
(+)
25 Vdc
(approx)
(-)
10
D.U.T
1Ω
NON
INDUCTIVE
PULSE
GENERATIOR
(NOTE 2)
0
0.25A
OSCILLOSCOPE
(NOTE 1)
-1.0A
NOTE: 1.Rise Time =7ns max.Input Impedance=1megohm.22pF
2.Rise time=10ns max.Source Impedance=50 ohms
TJ=25° C F=1MHz
Vsig=50mVp-p
1
0.1
1.0
10
100
REVERSE VOLTAGE,(V)
Web Site: WWW.PS-PFS.COM
SET TIME BASE FOR
50 /100NS /cm