PFS FR603

FAST RECOVER RECTIFIER
VOLTAGE RANGE
CURRENT
FR601 THRU FR607
50 to 1000 Volts
6.0Ampere
R-6
FEATURES
•
•
•
•
•
.052(1.3)
.048(1.2)
Low coat construction
Fast switching for high efficency.
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed:
260℃/10 secods/.375”(9.5mm)lead length at 5 lbs(2.3kg) tension
DIA.
1.0(25.4)
MIN.
.360(9.1)
.340(8.6)
.360(9.1)
.340(8.6)
MECHANICAL DATA
•
•
•
•
•
•
DIA.
1.0(25.4)
MIN.
Case: Transfer molded plastic
Epoxy: UL94V-O rate flame retardant
Polarity: Color band denotes cathode end
Lead: Plated axial lead, solderable per MIL-STD-202E method 208C
Mounting position: Any
Weight: 0.042ounce, 1.19 grams
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
•
•
•
Ratings at 25OC ambient temperature unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load
For capacitive load derate current by 20%
SYMBOLS
VRRM
VRMS
VDC
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
0.375”(9.5mm) lead length at T A= 75℃
Peak Forward Surge Current
8.3mS single half sine wave superimposed on
rated load (JEDEC method)
Maximum Instantaneous Forward Voltage @ 6.0A
Maximum DC Reverse Current at Rated
DC Blocking Voltage
TA = 25℃
TA = 100℃
Maximum Reverse Recovery Time (Note 3) T J=25℃
Typical Junction Capacitance (Note 1)
FR
601
50
35
50
FR
602
100
70
100
FR
603
200
140
200
FR
604
400
280
400
FR
605
600
420
600
FR
606
800
560
800
FR
607
1000
700
1000
UNITS
Volts
Volts
Volts
I(AV)
6.0
Amp
IFSM
300
Amps
VF
1.3
10
500
Volts
IR
trr
CJ
150
µA
250
500
150
ns
pF
Typical Thermal Resistance (Note 2)
RθJA
10
℃/W
Operating Junction Temperature Range
TJ
TSTG
(-55 to +150)
(-55 to +150)
℃
Storage Temperature Range
Notes:
1.Measured at 1.0MHz and Applied Reverse Voltage of 4.0Volits.
2 Thermal Resistance from junction to Ambient at .375”(9.5mm)lead length, P.C.board mounted.
3.Reverse Recovery Test Conditions:If=0.5mA,Ir=1.0mA,Irr=0.25A
Web Site: WWW.PS-PFS.COM
℃
FAST RECOVER RECTIFIER
VOLTAGE RANGE
CURRENT
FR601 THRU FR607
50 to 1000 Volts
6.0Ampere
RATING AND CHRACTERISTIC CURVES FR601 THRU FR607
FIG.2-MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
FIG.1-TYPICAL FORWARD CURRENT
DERATING CURVE
8.3ms Single Half Sine-Wave
(JEDEC Method) Tj=Tjmax
4.0
2.0
Single Phase
Half Wave 60Hz
Resistive or
Inductive Load
0.375"(9.5mm)Lead Length
200
CURRENT, (A)
PEAK FORWARD SURGE
300
(A)
AVERAGE FORWARD CURRENT,
6.0
100
1 Cycle
0
0
50
25
100
75
150
125
0
175
2
1
AMBIENT TEMPERATURE, (° C)
6
4
8
10
40
20
60 80 100
NUMBER OF CYCLES AT 60 Hz
FIG.3-TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
FIG.4-TYPICAL REVERSE
CHARACTERISTICS
1000
10
INSTANTANEOUS REVERSE CURRENT,
(uA)
T j =100° C
(A)
INSTANTANEOUS FORWARD CURRENT,
20
100
10
Tj =25° C
Pulse Width=300us
1% Duty Cycle
1.0
0.1
0.6
0.8
1.0
1.2
1.4
1.6
1.8
1.0
0.1
T j=25° C
0.01
0
2.0
40
20
60
80
100
120
140
PERCENT OF RATED PEAK
INSTANTANEOUS FORWARD VOLTAGE,(V)
REVERSE VOLTAGE,(%)
FIG.5-TYPICAL JUNCTION CAPACITANCE
FIG.6-TYPICAL THERMAL RESISTANCE
VS LEAD LENGTH
1000
(°C/W)
100
60
50
40
RθJL
THERMAL RESISTANCE,
JUNCTION CAPACITANCE,(pF)
70
Single Lead to heat Sinl
Insignificant Heat Flow
Throrgh Other Lead
30
20
TJ=25° C F=1MHz
Vsig=50mVp-p
10
Both Leads to Heat Sinl,
Equal Length
10
0.1
1.0
10
100
0
0
REVERSE VOLTAGE,(V)
0.2
0.4
0.6
0.8
EQUAL LEAD LENGTH TO HEAT SINK(IN)
Web Site: WWW.PS-PFS.COM
1.0