Cannon Speedy D IDC contacts Speedy D connectors terminate ribbon cables without stripping and without splicing. They are intermateable with all D Subminiature types offered on the market. The extremely low profile is another typical feature of the Speedy D. Technical Data Materials Shell Insulator Contacts Contact area Termination area Steel, with pure tin matt High quality thermoplast, flame retardant, UL94V-0 Copper alloy gold-plated over nickel pure tin, matt Mechanical Features Coupling Polarizing Termination Wire sizes Ribbon cable Temperature rating to DIN IEC 68 part 1 Friction, accessories Keystone shape shell IDC AWG 26 (0,13mm2), AWG 28 (0,08mm2) solid or stranded Conductor spacing 1,27mm -55/125°C Electrical Data 1.5 A at 25°C, 1 A at 70°C ambient temperature 15 mOhm (milli Ohm) 780 VAC 5 x 103 MOhm (Mega Ohm) minimum 0,9mm Current rating Contact resistance Voltage rating Insulation resistance Air/creepage paths Standard Contact Arrangements Contact size 20 Face view pin insert 1 2 6 Shell size No. of contacts 3 7 4 8 5 9 1 2 9 3 10 4 11 5 12 6 13 7 14 8 15 1 2 14 3 15 4 16 5 17 6 18 7 19 8 20 9 21 10 22 11 23 12 24 13 25 1 2 20 21 3 4 22 5 23 6 24 7 25 8 26 9 27 10 28 11 29 E A B C 9 15 25 37 12 30 13 31 14 32 15 33 16 34 17 35 18 36 19 37 Dimensions shown in mm Specifications and dimensions subject to change. www.ittcannon.com 2 Cannon Speedy D RoHS Compliant Ordering Key D B SF Y – 25 P – A190 – K87 Series D Subminiature Shell size E A B C – – – – 9 contacts 15 contacts 25 contacts 37 contacts Contact termination SF – flat cable termination Mounting method without letter– through-hole ø 3.05 E–clinch nut 4–40 X–clinch nut M3 Y–Float mounting Number of contacts 9; 15; 25; 37 Contact type P–Pin S–Socket Contact finish (=Performance class) without code – Performance class 3 A191 – Performance class 2 A190 – Performance class 1 Shielding and shell finish A197 – shell with pure tin, matt, (socket connector only) K87 – shielding with grounding indents. Pure tin, matt, (pin connector only) Modification F204 – supplied with strain relief Contact finishes/Performance class without code – performance class 3 (50 mating cycles) is standard version of Speedy D A191 – performance class 2 (200 mating cycles) A190 – performance class 1 (500 mating cycles) Dimensions shown in mm Specifications and dimensions subject to change. www.ittcannon.com 3 Cannon Speedy D A B A C D 0,2 M A 0,15 M B-E 2 3 4 4 3 2 12,9 -0,7 8,23 +0,25 1 1 ITT CANNON R ° 2, 6 2 -0 ,1 6 0,1 M C B 8,02 +0,25 3,05 +0,15 +0 ,1 10 12 12 12 12 10 11 12 2,84 R2 ,62 3,05 C +0,15 1 16,2 0,1 M D E 16 0,15 M B-E Pin connector / Socket connector C D n x 1,27 = E 6,3 -.0,25 0,8 +0,2 +0,2 0,9 6,1 -.0,25 22 -0,4 5,59 21,8 5 -.0,3 5 -.0,3 1,15 max. 1,27 ø1,2±0,02 ø1,2+0.1 Dimensions A ±0,3 B ±0,3 C ±0,15 D E No. of contacts 9 P S 30,8 30,8 25,0 25,0 16,8 16,25 19,4 19,4 8 x 1,27 = 10,18 15 P S 39,1 39,1 33,3 33,3 25,1 24,55 27,7 27,7 14 x 1,27 = 17,78 25 P S 53,0 53,0 47,0 47,0 38,85 38,3 41,4 41,4 24 x 1,27 = 30,48 37 P S 69,3 69,3 63,5 63,5 55,3 54,75 57,9 57,9 36 x 1,27 = 45,72 P–Pin S–Socket Mounting methods 3,30 MAX, 4-40UNC-B Standard Through-hole 2,8±03 M3 2,8±03 ø3,05+0,15 X Clinch nut M3 E Clinch nut 4-40UNC Ø 2,26 ± 0,08 Y dual float mount Dimensions shown in mm Specifications and dimensions subject to change. www.ittcannon.com 4 Cannon Speedy D IDC contacts Receptacle No. of contacts Through-hole Float mount Clinch nut 4–40* 9 15 25 37 DESF- 9 DASF-15 DBSF-25 DCSF-37 DESFY- 9 DASFY-15 DBSFY-25 DCSFY-37 DESFE- 9 DASFE-15 DBSFE-25 DCSFE-37 S-A197 S-A197 S-A197 S-1A97 S-A197 S-A197 S-A197 S-A197 S-A197 S-A197 S-A197 S-A197 or metric thread replace E by X Plugs (pin connector only) No. of contacts with grounding indents Float mount Clinch nut 4–40* 9 15 25 37 DESF- 9P-K87 DASF-15P-K87 DBSF-25P-K87 DCSF-37P-K87 DESFY- 9P-K87 DASFY-15P-K87 DBSFY-25P-K87 DCSFY-37P-K87 DESFE-9P-K87 DASFE-15P-K87 DBSFE-25P-K87 DCSFE-37P-K87 or metric thread replace E by X Performance class Performance class 1: A190 into order ref. Performance class 2: A191 into order ref. e.g.DESF—9P-A190-K87 or DESF—9S-A191-A197 Cable strain relief No. of contact 9 15 25 37 Order No. 029-8757-009 029-8757-015 029-8758-025 029-8757-037 Dimensions shown in mm Specifications and dimensions subject to change. www.ittcannon.com 5 Cannon Speedy D Mounting combinations Figure 1A Figure 1B Pin front mount rear mount B front mount A front mount C front mount Figure 2 Socket rear mount Figure 3 Pin front mount rear mount H rear mount Socket Pin rear mount front mount Pin rear mount C A B C front float mount rear float mount Socket front float mount Socket front float mount Fig. Size Pin Socket A +0,76 B +0,76 C +0,76 H _0,76/-0 1A A, E Standard Standard 6,35 7,63 6,99 6,99 1B B, C, D Standard Standard 6,04 7,71 7,06 6,68 2 A, E Standard float 5,53 – 6,18 – 2 B, C, D Standard float 5,23 – 6,25 – 2 A, E float Standard 5,53 – 6,18 – 2 B, C, D float Standard 5,23 – 5,87 – 3 A, E Standard float – 8,59 7,95 – 3 B, C, D Standard float – 8,66 7,64 – 3 A, E float Standard – 8,59 7,95 – 3 B, C, D float Standard – 8,51 7,87 – Remark: A, B, C and H are dimensions between panels and represent the recommended limit to be used in the design of the connector mounting method. Standard pin assemblies contain 0,38 mm thick front shells on E and A sizes and 0,61 mm thick shells on B, C and D sizes. Dimensions shown in mm Specifications and dimensions subject to change. www.ittcannon.com 6 Cannon Speedy D Panel cut-outs Front Mounting Cutout Rear Mounting Cutout 10° 10° 0,81R E E C D C D A B A B mounting A ±0,2 no. of contacts 9 15 25 37 50 B ±0,2 C ±0,2 D +0,1 rad. E ±0,2 front 22,2 25,0 13,0 3,0 2,1 rear 20,5 25,0 11,4 3,0 3,4 front 30,5 33,3 13,0 3,0 3,4 rear 28,8 33,3 11,4 3,0 3,4 front 44,3 47,0 13,0 3,0 2,1 rear 42,5 47,0 11,4 3,0 3,4 front 60,7 63,5 13,0 3,0 2,1 rear 59,1 63,5 11,4 3,0 3,4 front 58,3 61,1 15,8 3,0 2,1 rear 56,3 61,1 14,9 3,0 3,4 No. of contacts float mounting A ±0,2 B ±0,2 C ±0,2 D +0,1 rad. E ±0,2 9 front 23,0 25,0 13,8 2,2 2,1 rear 21,3 25,0 12,2 2,2 3,4 front 31,3 33,3 13,8 2,2 2,1 rear 29,6 33,3 12,2 2,2 3,4 front 45,1 47,0 13,8 2,2 2,1 15 25 37 50 rear 43,3 47,0 12,2 2,2 3,4 front 61,5 63,5 13,8 2,2 2,1 rear 59,8 63,5 12,2 2,2 3,4 front 59,2 61,1 16,6 2,2 2,1 rear 57,1 61,1 14,9 2,2 3,4 Mounting Panel F Standard Panel R F F – front mounting R – rear mounting Dimensions shown in mm Specifications and dimensions subject to change. www.ittcannon.com 7 Standard float mount Code Y R