SCHRACK General Purpose Relays Power PCB Relay RT2 I 2 pole 8 A, 2 CO or 2 NO contacts I DC- or AC-coil I Sensitive coil 400 mW I Reinforced insulation I WG version: Product in accordance to IEC60335-1 I RoHS compliant (Directive 2002/95/EC) as per product date code 0413 Applications Domestic appliances, heating control, emergency lighting, modems F0149-B Approvals V REG.-Nr. 6106, Z E214025, b 14385, B C0786 Technical data of approved types on request Contact data Contact configuration 2 CO or 2 NO Contact set single contact Type of interruption micro disconnection Rated current 8 A, UL: 10 A Rated voltage / max.switching voltage AC 250/400 VAC Limiting continuous current UL: 10 A Maximum breaking capacity AC 2000 VA Limiting making capacity, max 4 s, duty factor 10% 15 A Contact material AgNi 90/10, AgNi 90/10 gold plated, AgSnO2 Mechanical endurance DC coil > 30 x 106 cycles AC coil > 5 x 106 cycles Rated frequency of operation with / without load 6 / 1200 min-1 Contact Type RT424 RT444 RT424 RT424 RT424 RT424 RT424 RT424 ratings Load 8 A, 250 VAC, NO contact, 70°C, EN61810-1 6(3) A, 250 VAC, NO contact, 85°C; EN60730-1 6(2) A, 250 VAC, NO/NC contact, 85°C; EN60730-1 10 A, 250 VAC, CO contact, 70°C; General purpose, UL508 1/2hp @ 240 VAC, 1/4hp @ 120 VAC, UL508 Pilot duty B300, UL508 8 A, 30 VDC, General Purpose, UL508 4 A, 230 VAC, cosϕ=0.6, gas burner Cycles 100x103 100x103 100x103 30x103 150x103 Coil data Rated coil voltage range DC coil AC coil Coil power DC coil AC coil Operative range Coil insulation system according UL1446 5...110 VDC 24...230 VAC typ 400 mW typ 0,75 VA 2 class F Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC c mW 005 5 3.5 0.5 62+10% 403 006 6 4.2 0.6 90+10% 400 012 12 8.4 1.2 360+10% 400 024 24 16.8 2.4 1440+10% 400 048 48 33.6 4.8 5520+10% 417 060 60 42.0 6.0 8570+12% 420 110 110 77.0 11.0 28800+12% 420 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request 1 Datasheet Rev. GH1 Issued 2007/08 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. SCHRACK General Purpose Relays Power PCB Relay RT2 (Continued) Coil versions, AC-coil 50Hz Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power 50 Hz 50 Hz 50 Hz VAC VAC VAC c VA 524 24 18.0 3.6 350+10% 0.76 615 115 86.3 17.3 8100+15% 0.76 620 120 90.0 18.0 8800+15% 0.75 700 200 150.0 30.0 24350+15% 0.76 730 230 172.5 34.5 32500+15% 0.74 All figures are given for coil without preenergization, at ambient temperature +23°C Insulation Dielectric strength coil-contact circuit open contact circuit adjacent contact circuits Clearance / creepage coil-contact circuit adjacent contact circuits Material group of insulation parts Tracking index of relay base Insulation to IEC 60664-1 Type of insulation coil-contact circuit open contact circuit adjacent contact circuits Rated insulation voltage Pollution degree Rated voltage system Overvoltage category 5000 Vrms 1000 Vrms 2500 Vrms W 10 / 10 mm W 3 / 4 mm W IIIa PTI 250 V PCB layout / terminal assignment Bottom view on solder pins reinforced functional basic 250 V 3 240 V 2 400 V III Other data RoHS - Directive 2002/95/EC compliant as per product date code 0413 Flammability class according to UL94 V-0 For WG version: GWFI to IEC 60335-1 (IEC 60695-2-12) > 850 °C GWIT to IEC 60335-1 (IEC 60695-2-13) > 755 °C Ambient temperature range -40...+70°C Operate- / release time DC coil typ 7 / 2 ms Bounce time DC coil NO / NC contact typ 1 / 3 ms Vibration resistance (function) NO / NC contact 20 / 5 g, 30 ... 300 Hz Shock resistance (destruction) 100 g Category of protection RTII - flux proof, RTIII - wash tight Mounting pcb or on socket Mounting distance DC / AC coils 0 / 2.5 mm Resistance to soldering heat flux-proof version 270°C / 10 s wash-tight version 260°C / 5 s Relay weight 13 g Packaging unit 20 / 500 pcs S0418-CA *) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used. 2 CO contacts S0163-BJ Accessories For details see datasheet accessories RT 2 NO contacts Dimensions S0163-BK S0272-BA 2 Datasheet Rev. GH1 Issued 2007/08 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. SCHRACK General Purpose Relays Power PCB Relay RT2 (Continued) Product key R T 4 Type Version 4 8 A, pinning 5 mm, flux proof E 8 A, pinning 5 mm, wash tight Contact configuration 2 2 CO contacts 4 2 NO contacts Contact material 3 AgSnO2 4 AgNi 90/10 5 AgNi 90/10 gold plated Coil Coil code: please refer to coil versions table Version Blank Standard version WG Product in accordance with IEC 60335-1 (domestic appliances) Preferred types in bold print Product key RT423012 RT423024 RT424005 RT424006 RT424012 RT424024 RT424048 RT424060 RT424110 RT424524 RT424615 RT424730 RT425005 RT425012 RT425024 RT425524 RT425615 RT425730 RT444012 RT444024 RTE24005 RTE24006 RTE24012 RTE24024 RTE24048 RTE24060 RTE24110 RTE24524 RTE24615 RTE24730 RTE25005 RTE25012 RTE25024 Version 8A pinning 5 mm flux proof Contacts 2 CO contacts Cont. material AgSnO Coil DC-coil AgNi 90/10 AC-coil AgNi 90/10 gold plated DC-coil AC-coil 2 NO contacts 8A pinning 5 mm wash tight AgNi 90/10 DC-coil 2 CO contacts AC-coil AgNi 90/10 gold plated DC-coil Coil 12 VDC 24 VDC 5 VDC 6 VDC 12 VDC 24 VDC 48 VDC 60 VDC 110 VDC 24 VAC 115 VAC 230 VAC 5 VDC 12 VDC 24 VDC 24 VAC 115 VAC 230 VAC 12 VDC 24 VDC 5 VDC 6 VDC 12 VDC 24 VDC 48 VDC 60 VDC 110 VDC 24 VAC 115 VAC 230 VAC 5 VDC 12 VDC 24 VDC Part number 4-1419136-3 4-1393243-2 5-1393243-9 6-1393243-1 6-1393243-3 6-1393243-8 7-1393243-0 7-1393243-3 7-1393243-5 7-1393243-6 7-1393243-8 7-1393243-9 8-1393243-0 8-1393243-2 8-1393243-5 9-1393243-1 9-1393243-2 9-1393243-3 9-1393243-7 9-1393243-9 0-1393243-1 0-1393243-2 0-1393243-4 1-1393243-0 1-1393243-1 1-1393243-3 1-1393243-4 1-1393243-5 1-1393243-7 1-1393243-8 1-1393243-9 2-1393243-0 2-1393243-1 3 Datasheet Rev. GH1 Issued 2007/08 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.