LQA06T300 Qspeed™ Family 300 V, 6 A Q-Series Diode Product Summary IF(AVG) VRRM QRR (Typ at 125 °C) IRRM (Typ at 125 °C) Softness tb/ta (Typ at 125 °C) 6 300 27 1.87 0.7 General Description This device has the lowest QRR of any 300 V Silicon diode. Its recovery characteristics increase efficiency, reduce EMI and eliminate snubbers. A V nC A Applications • AC/DC and DC/DC output rectification • Output & freewheeling diodes • Motor control drive circuits • Uninterruptible Power Supply (UPS) inverters Pin Assignment Features • Low QRR, Low IRRM, Low tRR • High dIF/dt capable (1000A/µs) • Soft recovery A Benefits C • Increases efficiency • Eliminates need for snubber circuits • Reduces EMI filter component size & count • Enables extremely fast switching TO-220AC RoHS Compliant Package uses Lead-free plating and “Green” mold compound Halogen free per IEC 61249-2-21. Absolute Maximum Ratings Absolute maximum ratings are the values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Symbol Parameter VRRM IF(AVG) IFSM IFSM TJ TSTG Peak repetitive reverse voltage Average forward current Non-repetitive peak surge current Non-repetitive peak surge current Maximum junction temperature Storage temperature Lead soldering temperature Power dissipation Peak repetitive reverse voltage PD VRRM Conditions TJ = 150 °C, TC = 117°C 60 Hz, ½ cycle ½ cycle of T = 28 us Sinusoid, TC = 25 °C Leads at 1.6mm from case, 10 sec TC = 25 °C Rating Units 300 6 37 350 150 –55 to 150 300 33.8 300 V A A A °C °C °C W V Rating Units 62 3.7 °C/W °C/W Thermal Resistance Symbol Resistance from: Conditions RθJA RθJC Junction to ambient Junction to case TO-220 TO-220 www.powerint.com January 2011 LQA06T300 Electrical Specifications at TJ= 25 °C (unless otherwise specified) Symbol Parameter Conditions Min Typ Max Units - 0.24 1.6 1.34 19 25 1.9 - µA mA V V pF - 11.5 21 8.5 27 1.15 1.87 0.7 0.7 13 1.6 - ns ns nC nC A A DC Characteristics IR Reverse current VF Forward voltage CJ Junction capacitance VR = 300 V, TJ = 25 °C VR = 300 V, TJ = 125 °C IF = 6 A, TJ = 25 °C IF = 6 A, TJ = 150 °C VR = 10 V, 1 MHz Dynamic Characteristics tRR Reverse recovery time, dIF/dt =200A/µs VR=200V, IF=6A QRR Reverse recovery charge, dIF/dt =200A/µs VR=200V, IF=6A IRRM Maximum reverse recovery current, dIF/dt =200A/µs VR=200V, IF=6A S t Softness = b dIF/dt =200A/µs VR=200V, IF=6A ta TJ=25 °C TJ=125 °C TJ=25 °C TJ =125 °C TJ =25 °C TJ=125 °C TJ =25 °C TJ=125 °C Note to component engineers: Q-series diodes employ Schottky technologies in their design and construction. Therefore, component engineers should plan their test setups to be similar to traditional Schottky test setups. (For further details, see application note AN-300.) VR D1 DUT L1 tRR IF dIF/dt ta 15V Pulse generator tb + Rg Q1 0 0.1xIRRM IRRM Figure 1. Reverse Recovery Definitions Figure 2. Reverse Recovery Test Circuit 2 www.powerint.com Rev 1.2 01/11 LQA06T300 Electrical Specifications at TJ= 25 °C (unless otherwise specified) 1.0 12 0.9 10 0.8 8 Tj=125C 0.7 Tj=125C IF (A) IF (A) 0.6 6 4 0.5 0.4 Tj=25C 0.3 Tj=25C 0.2 2 0.1 0 0.0 0.0 0.5 1.0 1.5 2.0 0.0 0.1 0.2 0.3 0.4 0.5 VF (V) Figure 3. Typical IF vs VF 0.7 0.8 0.9 1.0 1.1 Figure 4. Typical IF vs VF 80 20 70 18 16 60 14 IF(AV) (A) 50 Cj (pF) 0.6 VF (V) 40 30 12 10 8 6 20 4 10 2 0 0 0 20 40 60 80 100 120 140 160 25 180 50 75 125 150 Case Temperature, TC ( C) Figure 5. Typical Cj vs VR Figure 6. DC Current Derating Curve 30 45 40 dIF /dt=500A/us 25 dIF /dt=200A/us 35 20 tRR (ns) 30 QRR (nC) 100 o VR (V) 25 dIF /dt=200A/us 20 15 dIF /dt=500A/us 10 15 10 5 5 0 0 0 1 2 3 4 5 6 I F (A) Figure 7. Typical QRR vs IF at Tj=125 °C 7 0 1 2 3 4 5 6 7 I F (A) Figure 8. Typical tRR vs IF at Tj=125 °C 3 Rev 1.2 01/11 www.powerint.com LQA06T300 40 35 30 IF(PEAK) (A) P (W) 25 20 15 10 5 0 25 50 75 100 125 150 duty cycle=10% 20 18 16 14 12 10 8 6 4 2 0 duty cycle=30% duty cycle=50% DC 25 o Case Temperature, TC ( C) 50 75 100 T C(°C) 125 150 Figure 10. IF(PEAK) vs TC, f=70 kHz Figure 9. IF(PEAK) vs TC, f=70 kHz LQA06T300 1 D= 0.5 D = 0.3 D= 0.1 0.1 Zth(j-c)/Rth(j-c) D= 0.05 D= 0.02 D= 0.01 0.01 D=0.005 D=0.002 Single Pulse 0.001 1.E-06 1.E-05 1.E-04 1.E-03 1.E-02 1.E-01 1.E+00 t1(sec) Figure 11. Normalized Maximum Transient Thermal Impedance 4 www.powerint.com Rev 1.2 01/11 LQA06T300 Dimensional Outline Drawings Millimeters Dim MIN MAX A 4.32 4.70 A1 1.14 1.40 A2 2.03 2.79 C 0.34 0.610 D 9.65 10.67 E 2.49 2.59 E1 4.98 5.18 F 0.508 1.016 F1 1.14 1.78 H 14.71 16.51 H1 5.84 6.55 H2 8.51 9.25 H3 3.53 3.96 H4 2.54 3.05 L 12.70 14.22 L1 - 6.35 ? Mechanical Mounting Method Maximum Torque / Pressure specification Screw through hole in package tab Clamp against package body 1 Newton Meter (nm) or 8.8 inch-pounds (lb-in) 12.3 kilogram-force per square centimeter (kgf/cm2) or 175 lbf/in2 Soldering time and temperature: This product has been designed for use with hightemperature, lead-free solder. The component leads can be subjected to a maximum temperature of 300 °C, for up to 10 seconds. See Application Note AN-303, for more details. Ordering Information Part Number Package Packing LQA06T300 TO-220AC 50 units/tube The information contained in this document is subject to change without notice. 5 Rev 1.2 01/11 www.powerint.com LQA06T300 Revision 1.1 1.2 Notes Released by Qspeed Converted to Power Integrations Document Date 05/09 01/11 6 www.powerint.com Rev 1.2 01/11 LQA06T300 For the latest updates, visit our website: www.powerint.com Power Integrations reserves the right to make changes to its products at any time to improve reliability or manufacturability. Power Integrations does not assume any liability arising from the use of any device or circuit described herein. POWER INTEGRATIONS MAKES NO WARRANTY HEREIN AND SPECIFICALLY DISCLAIMS ALL WARRANTIES INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. PATENT INFORMATION The products and applications illustrated herein (including transformer construction and circuits external to the products) may be covered by one or more U.S. and foreign patents, or potentially by pending U.S. and foreign patent applications assigned to Power Integrations. A complete list of Power Integrations’ patents may be found at www.powerint.com. Power Integrations grants its customers a license under certain patent rights as set forth at http://www.powerint.com/ip.htm. The PI Logo, TOPSwitch, TinySwitch, LinkSwitch, DPA-Switch, PeakSwitch, CAPZero, SENZero, LinkZero, HiperPFS, HiperTFS, Qspeed, EcoSmart, Clampless, E-Shield, Filterfuse, StackFET, PI Expert and PI FACTS are trademarks of Power Integrations, Inc. Other trademarks are property of their respective companies. ©Copyright 2011 Power Integrations, Inc. Power Integrations Worldwide Sales Support Locations WORLD HEADQUARTERS 5245 Hellyer Avenue San Jose, CA 95138, USA. Main: +1-408-414-9200 Customer Service: Phone: +1-408-414-9665 Fax: +1-408-414-9765 e-mail: [email protected] GERMANY Rueckertstrasse 3 D-80336, Munich Germany Phone: +49-89-5527-3911 Fax: +49-89-5527-3920 e-mail: [email protected] JAPAN Kosei Dai-3 Building 2-12-11, Shin-Yokohama, Kohoku-ku, Yokohama-shi, Kanagawa 222-0033 Japan Phone: +81-45-471-1021 Fax: +81-45-471-3717 e-mail: [email protected] TAIWAN 5F, No. 318, Nei Hu Rd., Sec. 1 Nei Hu District Taipei 114, Taiwan R.O.C. Phone: +886-2-2659-4570 Fax: +886-2-2659-4550 e-mail: [email protected] CHINA (SHANGHAI) Rm 1601/1610, Tower 1 Kerry Everbright City No. 218 Tianmu Road West Shanghai, P.R.C. 200070 Phone: +86-021-6354-6323 Fax: +86-021-6354-6325 e-mail: [email protected] INDIA th #1, 14 Main Road Vasanthanagar Bangalore-560052 India Phone: +91-80-4113-8020 Fax: +91-80-4113-8023 e-mail: [email protected] KOREA RM 602, 6FL Korea City Air Terminal B/D, 159-6 Samsung-Dong, Kangnam-Gu, Seoul, 135-728 Korea Phone: +82-2-2016-6610 Fax: +82-2-2016-6630 e-mail: [email protected] EUROPE HQ 1st Floor, St. James’s House East Street, Farnham Surrey GU9 7TJ United Kingdom Phone: +44 (0) 1252-730-141 Fax: +44 (0) 1252-727-689 e-mail: [email protected] CHINA (SHENZHEN) th Rm A, B & C 4 Floor, Block C, Electronics Science and Technology Building 2070 Shennan Zhong Road Shenzhen, Guangdong, P.R.C. 518031 Phone: +86-755-8379-3243 Fax: +86-755-8379-5828 e-mail: [email protected] ITALY Via De Amicis 2 20091 Bresso MI Italy Phone: +39-028-928-6000 Fax: +39-028-928-6009 e-mail: [email protected] SINGAPORE 51 Newton Road, #19-01/05 Goldhill Plaza Singapore, 308900 Phone: +65-6358-2160 Fax: +65-6358-2015 e-mail: [email protected] APPLICATIONS HOTLINE World Wide +1-408-414-9660 APPLICATIONS FAX World Wide +1-408-414-9760 7 Rev 1.2 01/11 www.powerint.com