05365 PAM20ST6305 Only One Name Means ProTek’Tion™ MULTI-LINE TVS ARRAY DESCRIPTION The PAM20ST6305 is a multi-line TVS array designed to protect automotive applications from the damaging effects of ESD and EFT. The PAM20ST6305 is available in a 5 line unidirectional or 4 line bidirectional configuration and is rated at 100 Watts peak pulse power, which is sufficient protection for tertiary type lightning threats at key interface locations. Packaged in a miniature SOT-563, the PAM20ST6305 meets IEC 61000-4-2 (ESD) and 61000-4-4 (EFT) immunity requirements. The device should be placed near a connector to provide the best protection against transients. SOT-563 PACKAGE FEATURES APPLICATIONS • Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV • Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns • 100 Watts Peak Pulse Power per Line(tp = 8/20µs) • Monolithic Design • Low Clamping Voltage • ESD Protection > 25 kilovolts • Low Leakage Current • Protects 4 Bidirectional Lines & 5 Unidirectional Lines • RoHS Compliant • REACH Compliant • Automotive Applications MECHANICAL CHARACTERISTICS • Molded JEDEC SOT-563 Package • Approximate Weight: 3 milligrams • Lead-Free Nickel Paladium Gold Plating • Solder Reflow Temperature - 260-270°C • Flammability Rating UL 94V-0 • 8mm Tape and Reel per EIA Standard 481 PIN CONFIGURATION 05365.R0 1/12 1 6 2 5 3 4 Page 1 www.protekdevices.com 05365 PAM20ST6305 Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature SYMBOL VALUE UNITS PPP 100 Watts TL -55 to 150 °C Storage Temperature TSTG -55 to 150 °C Maximum Forward Voltage @ 10mA VF 1.0 V ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER DEVICE MARKING PAM20ST6305 RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE VWM VOLTS @ 1mA V(BR) VOLTS 5.0 6.0 B MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE (Note 1) @ 8/20µs VC @ IPP @V WM ID µA @0V, 1MHz C pF 12.0V @ 9.0A 1 40 NOTES 1. Pins 1, 3, 4, 5 or 6 to pin 2. FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - Watts 10,000 1,000 100W, 8/20µs Waveform 100 10 0.1 05365.R0 1/12 1 10 100 td - Pulse Duration - µs Page 2 1,000 10,000 www.protekdevices.com 05365 PAM20ST6305 Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS FIGURE 2 PULSE WAVE FORM tf 100 Peak Value IPP 80 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs e-t 60 40 Peak Pulse Power 8/20µs 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP 120 FIGURE 3 POWER DERATING CURVE td = t/(IPP/2) 60 40 20 20 0 0 5 10 15 t - Time - µs 20 25 0 30 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 FIGURE 4 TYPICAL CLAMPING VOLTAGE VS PEAK PULSE CURRENT VC - Clamping Voltage - Volts 13 9 3 1 0 05365.R0 1/12 2 4 6 IPP - Peak Pulse Current - Amps Page 3 8 10 www.protekdevices.com 05365 PAM20ST6305 Only One Name Means ProTek’Tion™ SOT-563 PACKAGE INFORMATION OUTLINE DIMENSIONS DIM MILLIMETERS A MAX MIN MAX A 1.50 1.70 0.059 0.067 B 1.10 1.30 0.043 0.051 C 0.50 0.60 0.020 0.024 D 0.17 0.27 0.007 0.011 0.50 BSC K INCHES MIN G C B 1 0.020 BSC J 0.08 0.18 0.003 0.007 K 0.10 0.30 0.004 0.012 S 1.50 1.70 0.059 0.067 S D G J NOTES 1. Controlling dimension: inches. 2. Dimensioning and tolerances per ANSI Y14.5M, 1985. 3. Dimensions are exclusive of mold flash and metal burrs. PAD LAYOUT DIMENSIONS DIM MILLIMETERS INCHES NOMINAL NOMINAL A 1.40 0.055 B 1.02 0.040 C 0.30 0.012 D 0.51 0.020 E 0.51 0.020 E C A NOTES 1. Controlling dimension: inches. D B 05365.R0 1/12 Page 4 www.protekdevices.com 05365 PAM20ST6305 Only One Name Means ProTek’Tion™ TAPE AND REEL P0 P2 D t 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Top Cover Tape Pin 1 A0 F W K0 B0 P User Direction of Feed SPECIFICATIONS REEL DIA. TAPE WIDTH 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P tmax 1.78 ± 0.05 1.78 ± 0.05 0.69 ± 0.05 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 0.25 NOTES 1. 2. 3. 4. 5. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape. Suffix - T13 = 13” Reel - 10,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and pin one defined by dot on package. Package outline, pad layout and tape specifications per document number 06051.R3 3/11. ORDERING INFORMATION BASE PART NUMBER LEADFREE SUFFIX TAPE SUFFIX PAM20ST6305 N/A -T7 PAM20ST6305 N/A -T13 QTY/REEL REEL SIZE TUBE QTY 3,000 7” n/a 10,000 13” n/a This device is only available in a Lead-Free configuration. 05365.R0 1/12 Page 5 www.protekdevices.com 05365 PAM20ST6305 Only One Name Means ProTek’Tion™ COMPANY INFORMATION COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2012 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05365.R0 1/12 Page 6 www.protekdevices.com