05093 PMAD Series Only One Name Means ProTek’Tion™ ultra low capacitance multi-line steering diode array Description The PMAD Series are a low distortion steering diodes. These devices are intended for use in high frequency analog or digital data I/O ports for protection against Electrostatic Discharge (ESD) and Electrical Fast Transients (EFT). The PMAD Series is connected between rail-to-rail voltage bus or rail-to-ground for clamping and diverting overvoltage transients for the protection of sensitive network interface circuits. This series provides low capacitance, which insures signal integrity up to 900MHz, while complete isolation between adjacent diodes keeps cross-talk to a minimum. The PMAD Series is available in a 14 pin DIP and meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. 14 pin dip package Features applications • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(LineGnd) & Level 3(Line-Line) • 500 Milliwatt Continuous Power Dissipation • Monolithic Design • ESD Protection > 25 kilovolts • Protects up to 7 to 8 I/O Lines • Working Voltage > 50 Volts • Low Leakage Current < 0.1µA • Ultra Low Capacitance: 5pF per Diode • RoHS Compliant • REACH Compliant • High Frequency Data Lines • RS-232 & RS-422 Interface Networks • Ethernet 10/100 Base T • Computer I/O Ports Mechanical characteristics • Molded 14 Pin Dual-In-Line (DIP) Package • Approximate Weight: 1.2 grams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • Flammability Rating UL 94V-0 CIRCUIT DIAGRAM + I/O PORT GND OR (-) 05093.R11 2/11 Page 1 www.protekdevices.com 05093 PMAD Series Only One Name Means ProTek’Tion™ pin identification and configuration PMAD1103 PMAD1106 1 14 2 3 5 8 7 9 11 12 2 14 3 5 PMAD1105 5 7 8 9 11 12 8 Diode Common Cathode Array NC Pins 1, 4, 6, 10 & 13 8 Lines of Protection 05093.R11 2/11 11 12 PMAD1109 14 3 9 8 Diode Common Anode Array NC Pins 1, 4, 6, 10 & 13 8 Lines of Protection 16 Diode Array NC Pins 4, 6, 10 & 13 8 Lines of Protection 2 8 7 7 6 5 4 8 9 10 11 3 2 1 12 13 14 7 Isolated Diode Array (Independent) 7 Lines of Protection Page 2 www.protekdevices.com 05093 PMAD Series Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Continuous Power Dissipation SYMBOL VALUE UNITS PPK 500 Milliwatts Continuous Forward Current (Single Diode) IP 400 mA Repetitive Peak Forward Current @ tp = 5µs, F = 50kHz IFRM 700 mA Operating Temperature TA -55 to 150 °C TSTG -55 to 150 °C Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER REPETITIVE PEAK REVERSE VOLTAGE maximum forward peak pulse current maximum forward voltage MAXIMUM reverse leakage current maximum CAPACITANCE (Per Diode) @ 10µA V RRM VOLTS @ 8/20µs I FM amps @ 100mA VF volts VRRm @ 40v Ir µA @4V, 1MHz Cj pF PMAD1103 50 40 1.2 0.1 5 PMAD1105 50 40 1.2 0.1 5 PMAD1106 50 40 1.2 0.1 5 PMAD1109 50 40 1.2 0.1 5 figure 1 pulse wave form IPP - Peak Pulse Current - % of IPP 120 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t/(IPP/2) 20 0 05093.R11 2/11 tf 0 5 10 15 t - Time - µs Page 3 20 25 30 www.protekdevices.com 05093 PMAD Series Only One Name Means ProTek’Tion™ SPICE MODEL figure 1 spice model VCC+ I/O LCRD I/O LCRD LCRD Lg 0.6nH Lg 0.6nH PMAD1103 PMAD1105 PMAD1106 PMAD1109 LCRD - Low Capacitance Rectifier Diode Lg - Lead Inductance table 1 - spice parameters parameter 05093.R11 2/11 unit lcrd BV V 200 IBV µA 0.01 Cjo pF 5 IS A 1E-13 Vj V 0.6 M - 0.33 N - 1 RS Ohms 0.31 TT s 1E-9 EG eV 1.11 Page 4 www.protekdevices.com 05093 PMAD Series Only One Name Means ProTek’Tion™ 14 pin dip package information A outline dimensions millimeters dim inches min max min max A 18.16 19.56 0.715 0.770 B 6.10 6.60 0.240 0.260 C 7.37 7.87 0.290 0.310 D 0.20 0.38 0.008 0.015 E 0° 10° 0° 10° F 0.38 1.01 0.015 0.039 G 3.69 4.69 0.145 0.185 H 2.92 3.43 0.115 0.135 I 1.02 1.78 0.040 0.070 J 1.32 2.41 0.052 0.095 K 0.38 0.53 0.015 0.021 L 2.54 Orientation Dot (Pin #1) B I 10 Places C F G J 10 Places K 14 Places H D 16 Places E 0.100 L Notes 1. Dimensions are exclusive of mold flash and metal burrs. 2. Dimensions “J” and “L” are between centers. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty PMADxxxx -LF n/a n/a n/a 25 Notes 1. Marking on Part - logo, part number, date code and pin one defined by dot on top of package. Package outline per document number 06002.R3 9/09 05093.R11 2/11 Page 5 www.protekdevices.com 05093 PMAD Series Only One Name Means ProTek’Tion™ company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2000 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05093.R11 2/11 Page 6 www.protekdevices.com