P-tec Corporation Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL07 Series 3mm (T1) LED Absolute Maximum Ratings at TA = 25°C Features *Popular 3mm Lens Style with small Flange *1 GaP Red Chip used *Color Diffused Lens with a Wide Viewing Angle *High Intensity *Low Current Requirement *Reliable and Rugged *RoHS Compliant Power Dissipation……………………………………………………………..…….…... 90mW Reverse Voltage (<100µA)………..…………...…………………………..……..…..…..…. 5.0V Max Forward Current…………..………………..……………………….……….…..….. 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)………………….….…..….…… 100mA Operating Temperature Range…………………………………………….…… -25°C to +85°C Storage Temperature Range..………….………………….……………......… -40°C to +100°C Soldering Temperature (1.6mm below body)……………………………...….. 260°C for 5 seconds Electrical & Optical Characteristics at TA = 25°C Part Number Emitting Color Chip Material Color Diffused Lens PL07-CDR24 Red GaP Peak Wave Length Dominant Wave Length Viewing Angle 2θ ½ nm nm Deg Typ Max Min Typ 700 650 55° 2.1 3.0 1.0 3.0 Forward Voltage @20mA (V) Luminous Intensity @20mA (mcd) All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1 mm down the leads. 4.3 24.0Min. 2.54 ±0.1 2.9 0.5 Square Anode 1.0±0.5 1.02 1.5typ. 3.1 03-07-07 Rev 0 RS