P-tec Corporation Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL70 Series Cylindrical LED Absolute Maximum Ratings at TA = 25°C Features *Flat Top 3mm Lens with Flange *GaP Green LED Chip used *Very Wide Viewing Angle *High Light Output *Reliable and Rugged *RoHS Compliant Power Dissipation…………………………………………………………………………..…. 78mW Reverse Voltage (<100µA)………..…………...……………………………………….……..… 5.0V Max Forward Current…………..………………..…………………………………………..… 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)…………………….…………………. 100mA Operating Temperature Range…………………………………………………….…. -25°C to +85°C Storage Temperature Range..………….………………………………………….... -40°C to +100°C Soldering Temperature (1.6mm below body)……………….………………….....… 260°C for 5 seconds Electrical & Optical Characteristics at TA = 25°C Emitting Color Part Number Chip Material Color Diffused Lens PL70-CDG13 Green GaP Peak Wave Length Dominant Wave Length Viewing Angle 2θ ½ nm nm 567 572 Forward Voltage @20mA (V) Luminous Intensity @20mA (mcd) Deg Typ Max Min Typ 96° 2.1 2.6 2.5 5.5 All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1mm down the leads. 6.1 24.0Min. 3.8 3.0 2.95 2.54±0.1 Anode +0.5 0.4 -0.4 0.5 Square 1.5typ. 0.9 03-08-07 Rev 0 RS