Qualtek 125Watts Single Output P P C Electronics Corporation QPSF-125 Series Features: Universal AC input/ Full range Built-in active PFC function, PF>0.93 High Efficiency, and High Reliability Wide Operating Ambient Temperature (-20°C~60°C) Output Protections: OLP/OVP/SCP All using 105°C long life electrolytic capacitors. 100% full load burn-in test CB Model QPSF-125-5 QPSF-125-12 QPSF-125-15 QPSF-125-24 QPSF-125-28 QPSF-125-48 Output Characteristics DC Output 5V 12V 15V 24V 28V 48V Rated Current 20A 10.5A 8.4A 5.2A 4.5A 2.6A Current Range 0~20A 0~10.5A 0~8.4A 0~5.2A 0~4.5A 0~0.42A Ripple and Noise 100mV 100mV 100mV 100mV 120mV 150mV Voltage ADJ. Range ±10% of rated output voltage Voltage Accuracy ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% Line Regulation ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% Load Regulation ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% Set-up Time <2500ms (115VAC input, full load); <1200ms (230VAC input, full load) Hold-up Time >17ms (115VAC input, full load); >17ms (230VAC input, full load) Temperature Coefficient ±0.03%/°C Overshoot and Undershoot <5.0% Input Characteristics Voltage Range 90VAC~264VAC Frequency Range 47Hz-63Hz Power Factor (Typical) PF>0.98/115VAC PF>0.93/230VAC Efficiency 115VAC Input 82% 85% 85% 85% 85% 86% 230VAC Input AC Current (max) 84% 87% 87% 87% 87% 88% 1.5A 1.5A 1.5A (Typical) 1.5A Inrush Current (Typical) 1.5A 1.5A 30A@115VAC Cold start 60A@230VAC Cold start Leakage Current <3.5mA Protection Over Load (OLP) 105%~150% of rated output current, hiccup mode, auto recover Over Voltage (OVP) 120%~150% of rated output voltage, hiccup mode Short Circuit (SCP) Long-term mode, auto recovery Environmental Characteristics Operating Amb. Temp. & Hum -20°C~60°C; 20%~90% RH Non-Condensing Storage Temp. & Hum -40°C~85°C: 10%-95% RH Non-Condensing Safety Standards GB4943-2001; EN60950-1: 2006 Withstand Voltage Primary-Secondary: 3.0KVAC;≤10mA. Primary-PG: 1.5KVAC;≤10mA. Secondary-PG: 0.5KVDC;≤10mA Isolation Resistance ≥100M ohms EMI Conduction & Radiation Compliance to EN55022(CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,-3 EMS Immunity Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, light industry level, criteria A General Characteristics MTBF (MIL-HDBK-217F) More than 100,000Hrs (25°C, Full load) Dimension (LxWxH) 127x76x30.5mm Packing 21PCS/CTN. G.W: 8.46kgs Connection 7P/8.025MM barrier terminal block Cooling Method Cooling by free air convection Page 1 of 2 125Watts Single Output Qualtek Electronics Corporation P P C QPSF-125 Series MECHANICAL SPECIFICATIONS ITEM AC IN (CON1) DC OUT (CON2) CONNECTOR MATING HOUSING LANDWIN 3961P0300T (CENTER PIN REMOVED) LANDWIN 3960S OR JST VHR LANDWIN 3961P0800T REMOTE SENSE (CON3) LANDWIN 2541P0200T LANDWIN 2510S OR 2540S OR MOLEX 5051 TERMINAL LANDWIN 3963T011R OR JST SVH-21T-P1.1 LANDWIN 2563T011X OR 2543T011X OR MOLEX 4809 UNIT: mm ISO-9001 Company www.qualtekusa.com Page 2 of 2