Qualtek 75Watts Single Output P P C Electronics Corporation QPD-75 Series Features: Universal AC input/ Full range No Load Power Consumption <0.5W Wide Operating Ambient Temperature (-25°C~70°C) Operating Altitude up to 5000M High Efficiency, and High Reliability Output Protections: OLP/OVP/SCP All using 105°C long life electrolytic capacitors. 100% full load burn-in test Withstand 300VA Surge Input for 5 Sec PCB soldering side with conformal coating CB Model QPD-75-5 QPD-75-12 QPD-75-15 QPD-75-24 QPD-75-48 Output Characteristics DC Output 5V 12V 15V 24V 48V Rated Current 12A 6A 5A 3.2A 1.62A Current Range 0~12A 0~6A 0~5A 0~3.2A 0~1.62A Ripple and Noise (-25~70°C) 80mV 120mV 150mV 200mV 200mV Voltage ADJ. Range ±10% of rated output voltage Voltage Accuracy ±3.0% ±3.0% ±3.0% ±3.0% ±3.0% Line Regulation ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% Load Regulation ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% Set-up Time <2.0s (115VAC input, full load); <1.5s (230VAC input, full load) Hold-up Time >20ms (115VAC input, full load); >50ms (230VAC input, full load) Temperature Coefficient ±0.03%/°C Overshoot and Undershoot <5.0% Input Characteristics 90VAC~264VAC, 127VDC~370VDC Voltage Range Frequency Range 47Hz-63Hz Efficiency 115VAC Input 79% 84% 85% 86% 88% (Typical) 230VAC Input 80% 85% 86% 87% 89% AC Current (max) <2.5A Inrush Current (Typical) <20A@115VAC Cold start <40A@230VAC Cold start Leakage Current Input-Output: <0.25mA Input-PG: <0.75mA Protection Over Load (OLP) 105%~150% of rated output current, constant power, auto recovery Over Voltage (OVP) 105%~150% of rated output voltage, constant voltage Short Circuit (SCP) Long-term mode, auto recovery Environmental Characteristics Operating Amb. Temp. & Hum -25°C~70°C; 20%~90% RH Non-Condensing Storage Temp. & Hum -40°C~85°C; 10%-95% RH Non-Condensing Safety Standards UL60950-1; EN60950-1: 2006 Withstand Voltage Primary-Secondary: 3.0KVAC;≤10mA. Primary-PG: 1.5KVAC;≤10mA. Secondary-PG: 0.5KVDC;≤10mA Isolation Resistance ≥100M ohms EMI Conduction & Radiation Compliance to EN55022(CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,-3 EMS Immunity Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, light industry level, criteria A General Characteristics MTBF (MIL-HDBK-217F) More than 100,000Hrs (25°C, Full load) Dimension (LxWxH) 129x98x38mm Packing 30PCS/CTN. G.W: 14.2kgs Cooling Method Cooling by free air convection Page 1 of 2 75Watts Single Output Qualtek P QPD-75 Series P C Electronics Corporation N 2 6 L 1 3 -V 4 +V 5 MECHANICAL SPECIFICATIONS SMPS Cover Customer plate Assemble Screw L L<=4mm Pin No. 1 2 3 4 5 Assignment AC-L AC-N F.G DC output -V DC output +V DERATING CURVE UNIT: mm ISO-9001 Company www.qualtekusa.com Page 2 of 2