OCO-M20BH Through hole OCXO HCMOS Features Applications: CDMA, 3G, networking, instrumentation High frequency stability vs. temperature Low aging Specification Parameter OCO-M20BH3 Frequency range Standard frequencies OCO-M20BH5 10.0000 ~ 25.0000 MHz 10.00, 12.80, 13.00, 16.384 & 20.00 MHz ±5 x 10-8 over -40 ~ +70 °C ±2 x 10-8 over -20 ~ +70 °C ±5 x 10-9 ±5 % ±5 x 10-9 ±5 % -8 ±5 x 10 1st year -11 < 1 x 10 Allan deviation per 1 s HCMOS VOH > 3.0 V VOL < 0.3 V VOH > 4.5 V VOL < 0.5 V 10 k // 15 pF ±10 % +3.3 V 5 % +5.0 V 5 % < 250 mA < 150 mA -7 < 3 min < 1 x 10 @ +25 °C > ±5 x 10-7 positive slope 0 ~ +2.8 V 0 ~ +4.5 V 20 kΩ +2.8 V +4.5 V < -120 dBc/Hz @ 10 Hz < -140 dBc/Hz @ 100 Hz < -145 dBc/Hz @ 1 kHz < -150 dBc/Hz @ 10 kHz 20 ~ +70 °C or -40 ~ +70 °C -55 ~ +85 °C Frequency stability vs. operating temperature range vs. supply voltage change vs. load change vs. aging after 30 days of operation Short term stability Output waveform Output waveform Output load Supply voltage Steady-state current consumption @ +25 °C Warm-up time Frequency pulling range Vcontrol (Vc) via external voltage Vcontrol (Vc) via external potentiometer Reference voltage output (Vref) Phase noise @ 13 MHz carrier frequency Operating temperature range Storage temperature range Environmental test vibration acceleration: 10 g; 10 Hz up to 500 Hz and down to 10 Hz; all 3 axes, 4.5 h/axis shock 100 g, half-sine, 3 ms (3 shocks each, 6 directions) Pin function #1 #2 #3 #4 #5 Vdc RF output GND Vc Vref Circuit diagram CBP = 0.01 mF Zout = 10 k // 15 pF 2002/95/EC RoHS compliant QuartzCom AG [email protected] www.quartzcom.com QuartzCom Asia [email protected] QuartzCom USA [email protected] 12 May. 10