OCO-SM14H Through hole OCXO HCMOS Features Applications: GPS, base-station, synchronisation, satelite-modem Small case size (DIL14 / 4 pin) Wide operating temperature range from -40 up to +85 °C Short warm up time of < 30 s Parameter Specification Frequency range Standard frequencies 10.0000 ~ 60.0000 MHz 10.00, 12.80, 16.000, 16.384, 19.44, 20.00 & 40.00 MHz ≤ ±0.20 ppm 0.3 ppm (peak to peak) over -40 ~ +85 °C ≤ ±0.15 ppm 0.2 ppm (peak to peak) over -20 ~ +70 °C ≤ ±0.075 ppm 0.1 ppm (peak to peak) over -10 ~ +60 °C ≤ ±0.10 ppm ±0.2 V ≤ ±0.01 ppm ±10 % ≤ ±0.30 ppm 1st year ≤ ±2.50 ppm 10 years < 5 x 10-10 Allan deviation over 0.1 ~ 30 s HCMOS VOH > 0.9 Vdc VOL < 0.1 Vdc 10 LS-TTL ±5 % < 5 ns +5.0 V ±0.2 V < 80 mA < 30 s within spec Frequency stability vs. operating temperature range (tighter stability on request) vs. supply voltage change vs. load change vs. aging after 30 days of operation vs. long term aging Short term stability Output waveform Output load Rise / Fall time Supply voltage (1) Steady-state current consumption @ +25 °C Warm-up time @ 25 °C Frequency pulling range Vcontrol (Vc) via external voltage Vcontrol (Vc) via external potentiometer Phase noise @ 10 MHz carrier frequency Operating temperature range Storage temperature range (1) Supply voltage 3.3 V and 12 V on request > ±3 ppm positive slope 0.5 ~ +5.0 V 10 kΩ -100 dBc/Hz @ 10 Hz -130 dBc/Hz @ 100 Hz -140 dBc/Hz @ 1 kHz -145 dBc/Hz @ 10 kHz -10 ~ +60 °C, -20 ~ +70 °C or -40 ~ +85 °C -65 ~ +125 °C Environmental test vibration shock acceleration: 10 g; 10 Hz up to 2’000 Hz and down to 10 Hz; all 3 axes, 4,5 h/axis 2’000 g, half-sine, 3 ms, (3 shocks each, 6 directions) Pin function: # 1 # 7 # 8 # 14 Example for solder pattern Vc GND RF Output Vdc Do not design any conductive path between the patter Example for IR reflow soldering temperature 2002/95/EC RoHS compliant QuartzCom AG [email protected] www.quartzcom.com QuartzCom Asia [email protected] QuartzCom USA [email protected] 13 May. 10