C2000 MCU LED Lighting Guide ™ Enabling industry-leading energy efficiency, adaptive intelligence and remote connectivity, C2000 Piccolo™ MCUs are lighting the way for the future of LED illumination designs. Energy efficiency With a track-record of delivering efficient and feature-rich digital power solutions, C2000 Piccolo microcontrollers are finely tuned to drive higher efficiencies in LED lighting designs, meaning greater savings on customers’ energy bills and differentiation of lighting products in an energy-conscious world. Intelligence Looking for intelligence in your lighting product without the added cost of external components? C2000 Piccolo microcontrollers have you covered. With peripherals such as USB, I2C, SPI, CAP and UART, Piccolo digital control enables advanced functionality such as temperature monitoring, fault detection, light output tuning, proximity sensing and more. With the availability of integrated timers, capabilities such as dimming schedulers and advanced lighting control can easily be added. Connectivity C2000 lighting solutions provide the connectivity and remote control the market demands, without the cost of an external communications module. Piccolo microcontrollers enable advanced communications standards such as power line communications (PLC), DALI, DMX512, KNX and RF. Applications The Piccolo lighting kits are ideal for a range of applications including outdoor, architectural, entertainment, commercial, industrial, and automotive. Single rail, multi-string, DC/DC boost C2000 MCU lighting advantage • Portfolio of Piccolo MCUs enable a range of lighting designs from simple, offline lighting designs to remote-connectivity-enabled adaptive designs • Digital power software libraries provide the building blocks for efficient digital power supply design • Lighting control and communications software examples and user guides walk developers through the software and hardware implementations of LED lighting control and communications • Hardware reference designs provide various example lighting implementations from DC/DC designs to AC/DC plus communications controlSUITE™ software For C2000 development kit software and information, download controlSUITE at www.ti.com/controlSUITE Multi-rail, multi-string, DC/DC boost Single-rail, multi-string, AC/DC PFC, comms Part number AC/DC DC/DC Lighting Communications TMDSDCDCLEDKIT None Sepic buck/boost Multi-string , common rail, PWM dimming None TMDSRGBLEDKIT None Boost and sepic buck/boost Multi-string, multi-rail, PWM dimming None TMDSIACLEDCOMKIT UCC28810D-based AC/DC with PFC Resonant LLC Multi-string, common rail, PWM dimming PLC, DALI, DMX, KNX*, RF* *KNX and RF software support not included. Multi-Rail, Multi-String DC/DC Single Rail, Multi-String DC/DC DC/DC Multi-Rail, Multi-String Piccolo™ MCU + C28x Core 32 bit 40–80 MHz FPU + + ADC 12 bit VCU CLA + PWM eCAP SPI 2 IC SCI CAN PWM + For more information about C2000 Piccolo MCUs, please visit www.ti.com/c2000 + TMDSDCDCLEDKIT C2000™ MCU Developer Kit For more information or to order an LED Lighting developer kit, please visit www.ti.com/c2000tools TMDSRGBLEDKIT Isolated AC/DC PFC, Single Rail, Multi-String and Communications Filter + PFC Boost UCC28810D LLC Resonant DC/DC PLC DALI DMX KNX RF TMDSIACLEDCOMKIT Important Notice: The products and services of Texas Instruments Incorporated and its subsidiaries described herein are sold subject to TI’s standard terms and conditions of sale. Customers are advised to obtain the most current and complete information about TI products and services before placing orders. TI assumes no liability for applications assistance, customer’s applications or product designs, software performance, or infringement of patents. The publication of information regarding any other company’s products or services does not constitute TI’s approval, warranty or endorsement thereof. The platform bar, C2000, controlSUITE, and Piccolo are trademarks of Texas Instruments. All other trademarks are the property of their respective owners. SPRT623 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2012, Texas Instruments Incorporated