SF1062A ® • • • • • Designed for GSM PCS Receiver IF Applications Simple External Impedance Matching Hermetic SMP-87 Surface-Mount Case Unbalanced Input and Output Complies with Directive 2002/95/EC (RoHS) Pb 211.0 MHz SAW Filter Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +10 dBm Max. DC voltage between any 2 terminals 30 VDC Storage Temperature Range -40 to +85 Suitable for lead-free soldering - Max Soldering Profile °C SMP-87 260°C for 30 s Electrical Characteristics Characteristic Nominal Center Frequency Passband Sym fC Insertion Loss at fc 1.5 dB Passband Notes 1 IL BW1.5 2 dB Passband BW2 ±80 3 dB Passband BW3 ±100 Group Delay Variation over fc ±50 kHz Absolute Group Delay 1, 2 Max Units MHz 6 9.0 dB kHz ±135 GDV 200 GD 2.6 fc-400 to fc-200 and fc+200 to fc+400 MHz 1.5 dBP-P 500 nsP-P µs 5 fc-600 to fc-400 and fc+400 to fc+600 MHz 1, 2, 3 fc-800 to fc-600 and fc+600 to fc+800 MHz 191 MHz to fc-800 kHz and fc+800 kHz to 231 MHz TA Operating Temperature Range Typ 211.000 ±50 Amplitude Ripple over fc±50 kHz Rejection Min 1 Impedance Matching to 50 Ω unbalanced 25 30 35 35 45 dB +85 -40 °C External L-C Case Style SMP-87 22.1 X 8 mm Nominal Footprint Lid Symbolization (YY=year, WW=week) RFM SF1062A YYWW Electrical Connections Connection Terminals Port 1Hot 2 Port 1 Gnd Return 3 Port 2 Hot 8 Port 2 Gnd Return Case Ground 9 All Others Notes: 1. 2. 3. 4. 5. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." The design, manufacturing process, and specifications of this filter are subject 6. 7. 8. 9. 10. to change. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. ©Copyright 1999, RF Monolithics Inc. Electrostatic Sensitive Device. Observe precautions for handling. RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com SF1062A 112904 211.00 MHz SAW Filter RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com SF1062A 112904 211.00 MHz SAW Filter SMP-87 Case 10-Terminal Ceramic Surface-Mount Case 22.1 x 8 mm Nominal Footprint Case Dimensions Dimension Min 21.90 7.80 A B C D E H M N P Materials mm Nom 22.10 8.00 1.78 2.29 1.02 1.0 4.83 2.41 1.905 Max 22.40 8.30 2.00 Min 0.862 0.307 Inches Nom 0.870 0.315 0.070 0.090 0.040 0.039 0.190 0.095 0.075 Electrical Connections Solder Pad Termination Au plating 30 - 60 µinches (76.2-152 µm) over 80200 µinches (203-508 µm) Ni. Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 µinches Thick Body Al2O3 Ceramic Connection Port 1 Port 2 Terminals Input or Return 10 Return or Input 1 Output or Return 5 Return or Output Pb Free 6 Ground All others Single Ended Operation Return is ground Differential Operation Return is hot H B C D N E (10 Places) M A P (8 Places) Terminal Detail TOP VIEW Max 0.882 0.327 0.079 BOTTOM VIEW RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com SF1062A 112904 BILL OF MATERIALS PART IDENTIFIER SF1062A-DEMO 400-1400-001 400-0533-001 500-0319-001 SF1062A-LRIP SF1062A-000 500-0003-180 500-0003-270 500-0248-001 500-0010-560 500-0010-470 500-0010-120 500-0010-047 DESCRIPTION 1 DESCRIPTION 2 DEMO BOARD, SF1062A, QTY/ASSY REFERENCE DESCRIPTION NORTEL MATRA CELLULAR PCB, DEMO BOARD, SF1081A SHIELD, TO-39 TEST FIXTURE TAPE, COPPER FOIL, SCOTCH FILTER, SM, 211.000 MHZ ASSY DIAGRAM, DEMO BOARD, CAP, CHIP, NPO, 18(J), STD CAP, CHIP, NPO, 27(J), STD CONN, COAX, FLANGE MT. JACK IND, CHIP, 1008CS, 56 NH, 10% IND, CHIP, 1008CS, 47 NH, 10% IND, CHIP, 1008CS, 12 NH, 10% IND, CHIP, 1008CS, 10% 1.0000 1.0000 0 1.0000 0 1.0000 1.0000 2.0000 1.0000 1.0000 1.0000 1.0000 TYPE 1181, 44F3260, 1/2” NORTEL MATRA SF1062A 4 HOLE COIL CRAFT 1008CS-560 SIZE FSCM NO. A SCALE NONE W/O or ECN C1 C2 J 1, 2 L1 L2 L3 L4 DWG NO. SF1062A-DEMO 2U874 7387 REV A SHEET 1 OF 2 REV HISTORY REV ECN DATE A 7387 01/06/99 DESCRIPTION INITIAL RELEASE SIZE FSCM NO. A SCALE NONE W/O or ECN DWG NO. SF1062A-DEMO 2U874 7387 REV A SHEET 2 OF 2