DIA. "D" PART NO. .46 11.6 COUNTERBORE X 1/8 [3.2] DEEP " MOUNTING SCREW FTH-27-RS-01 .205 [5.2] #10 [M5] SCREW OR RIVETS FTH-27-12-01 .230 [5.8] #10 [M5] & #12 [M5] SCREWS (USE PAN HEAD OD BINDER HEAD SCREWS) D" MOUNTING RIVETS FOR FTH-27-RS ACCOMODATES "RKW" SERIES TIES UP TO 1/2 [12.7] WIDE USE RIVET NO. HOLE DIA. (CHASSIS) FOR PANEL THICKNESS RANGE SR-5055 SR-5065 SR-5075 SR-5085 SR-5095 SR-5105 .201 [5.1] .201 [5.1] .201 [5.1] .201 [5.1] .201 [5.1] .201 [5.1] .035-.075 [0.9-1.9] .075-.114 [1.9-2.9] .114-.154 [2.9-3.9] .154-.193 [3.9-4.9] .193-.232 [4.9-5.9] .232-.272 [5.9-6.9] .53 13.3 REF .50 12.7 .77 19.5 1.02 25.9 NOTES: 1. MATERIAL: NYLON 6/6 UL 94 V-2 (RMS-01). 2. MATERIAL: NYLON 6/6 UL 94 V-0 (RMS-19), AVAILABLE BY SPECIAL ORDER ONLY. TO ORDER USE P/N: FTH-27-XX-19. 3. COLOR: NATURAL. TITLE: CREATED USING SOLIDWORKS D REV. COMPLETELY REDRAWN, SEE ECN #1090 SEE ENGINEERING FOR REV A-C DESCRIPTION SK 11/02/05 -ENGR. DATE TOLERANCES UNLESS NOTED .XX=±.010 .XXX=±.005 FRAC.=±1/64 ANG.=±1° FLAT TIE HOLDER FILE #: FTH-27 SHEET: 1 OF 1 RE: SHEET SIZE: A RICHCO, INC. DWN: SK DT: 11/02/05 APP: CHKD: - RICHCO, INC. [email protected] (773) 539-4060 DWG IN IN [MM] FINAL PART # PRINT TYPE SEE TABLE CA