PART NO. NYLON 6/6 UL 94 NYLON 6/6 UL 94 V-2 (RMS-01) V-0 (RMS-19) WS-A-1-01 WS-A-2-01 WS-A-3-01 WS-A-4-01 WS-A-2-1-01 WS-A-2-2-01 WS-A-2-3-01 WS-A-2-4-01 .61 15.4 REF WS-A-1-19 WS-A-2-19 WS-A-3-19 WS-A-4-19 WS-A-2-1-19 WS-A-2-2-19 WS-A-2-3-19 WS-A-2-4-19 7/16 11.1 REF DIM. "A" REF DIM. "B" REF .52 [13.2] .19 [4.8] .71 [18] .38 [9.7] 1.07 [27.2] .74 [18.8] 1.38 [35] 1.05 [26.7] .52 [13.2] .19 [4.8] .71 [18] .38 [9.7] 1.07 [27.2] .74 [18.8] 1.38 [35] 1.05 [26.7] DIM. "C" REF PANEL THICKNESS .11 [2.8] 1/16 [1.6] .15 [3.8] 1/8 [3.2] 7/32 [5.6] "B" "A" "C" 7/32 [5.6] .56 14.2 NOTES: REF 1. COLOR: NATURAL. 2. ALTERNATE UNITS FOR REFERENCE ONLY. 3. MATERIAL: NYLON 6/6 UVB (RMS-46). COLOR BLACK. AVAILABLE BY SPECIAL ORDER ONLY. TO ORDER REPLACE "-01" WITH -UVB". TITLE: F E D REV. SEE CO 200341 FOR CHANGES SEE CO 200033 FOR CHANGES REDRAWN, SEE ECN #1333 FOR CHANGES SEE ENGINEERING FOR REV A-C DESCRIPTION SK 03/17/09 SK 09/25/07 SK 06/13/07 ------ENGR. DATE CREATED USING SOLIDWORKS TOLERANCES UNLESS NOTED .XX=±.010 .XXX=±.005 FRAC.=±1/64 ANG.=±1° TO SNAP-LOCK IN A .187±.003 [4.75±0.08] DIA. HOLE, IN A PANEL THICKNESS INDICATED WIRE SADDLE W/ ARROWHEAD FILE #: WS-A SHEET: 1 OF 1 RE: SHEET SIZE: A RICHCO, INC. DWN: SK DT: 06/13/07 APP: RT CHKD: RG RICHCO, INC. [email protected] (773) 539-4060 PART # DWG IN IN [MM] FINAL PRINT TYPE SEE TABLE CA