FR201G ~ FR207G VOLTAGE 50 ~ 1000 V 2.0 A, Glass Passivated Fast Recovery Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES z z z z DO-15 Low forward voltage drop High current capability High reliability High surge current capability C A B MECHANICAL DATA z z z z z z z D Glass Passivated Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.4300 grams (approximately) A REF. A B C D Millimeter Min. Max. 25.4 (TYP) 5.80 7.62 2.60 3.60 0.90 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%. PART NUMBERS SYMBOL FR FR FR FR FR PARAMETERS 202 G 203 G 204 G 205 G FR 206 G FR 207 G UNITS 201 G Recurrent Reverse Voltage (Max.) VRRM 50 100 200 400 600 800 1000 V RMS Voltage (Max.) VRMS 35 70 140 280 420 560 700 V DC Blocking Voltage (Max.) VDC 50 100 200 400 600 800 1000 V Instantaneous Forward Voltage(Max.) VF Average Forward Rectified Current (Max.) Peak Forward Surge Current DC Reverse Current (Max.) 1.3 2.0 IO IFSM 50 5.0 IR V IF = 2A A 0.375” (9.5mm) lead length @ TA = 75°C A 8.3ms single half sine-wave superimposed on rated load (JEDEC method) μA 100 Reverse Recovery Time (Max.) TRR Junction Capacitance (Typ.) CJ 40 pF Storage Temperature Range TSTG -65 ~ 150 °C http://www.SeCoSGmbH.com/ 01-April-2009 Rev. B 150 250 500 TESTING CONDITIONS nS VR = VDC, TA=25°C VR=VDC, TA=100°C IF=0.5A, IR=1.0A, IRR=0.25A f=1MHz and applied 4V DC reverse voltage Any changes of specification will not be informed individually. Page 1 of 2 FR201G ~ FR207G VOLTAGE 50 ~ 1000 V 2.0 A, Glass Passivated Fast Recovery Rectifiers Elektronische Bauelemente RATINGS AND CHARACTERISTIC CURVES (FR201G THRU FR207G) FIG.1-TYPICAL FORWARD FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,(A) CHARACTERISTICS 10 3.0 1.0 3.0 2.5 2.0 Single Phase 1.5 Half Wave 60Hz Resistive Or Inductive Load 1.0 0.375"(9.5mm) Lead Length 0.5 0 0 20 40 60 Tj=25 C Pulse Width 300us 1% Duty Cycle 0.1 .01 80 100 120 140 160 180 200 AMBIENT TEMPERATURE,( C) FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 FORWARD VOLTAGE,(V) FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS 50W NONINDUCTIVE 10W NONINDUCTIVE ( ) (+) D.U.T. 25Vdc (approx.) PULSE GENERATOR (NOTE 2) ( ) 1W NONINDUCTIVE OSCILLISCOPE (NOTE 1) PEAK FORWARD SURGE CURRENT,(A) INSTANTANEOUS FORWARD CURRENT,(A) 50 100 80 60 Sine Wave JEDEC method 20 0 1 0 -0.25A FIG.5-TYPICAL JUNCTION CAPACITANCE 1cm SET TIME BASE FOR 50 / 10ns / cm http://www.SeCoSGmbH.com/ 01-April-2009 Rev. B 120 100 80 60 40 20 0 -1.0A 100 140 JUNCTION CAPACITANCE,(pF) | | | | | | | | 50 10 NUMBER OF CYCLES AT 60Hz 2. Rise Time= 10ns max., Source Impedance= 50 ohms. trr 5 (+) NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. +0.5A 8.3ms Single Half Tj=25 C 40 .01 .05 .1 .5 1 5 10 50 100 REVERSE VOLTAGE,(V) Any changes of specification will not be informed individually. Page 2 of 2