FR101 THRU FR107 VOLTAGE 50V ~ 1000V 1.0 AMP Glass Passivated Fast Rectifier Elektronische Bauelemente RoHS Compliant Product A suffix of "-C" specifies halogen-free DO-41 FEATURES .107(2.7) .080(2.0) DIA. . Low Forward Voltage Drop . High Current Capability . High Reliability . High Surge Current Capability . High Speed Switching 1.0(25.4) MIN. .205(5.2) .166(4.2) MECHANICAL DATA 1.0(25.4) MIN. .034(.9) .028(.7) DIA. . Case: Molded Plastic . Epoxy: UL 94V-0 Rate Flame Retardant . Lead: Axial Lead, Solder Able per MIL-STD-202, Dimensions in inches and (millimeters) Method 208 Guaranteed . Polarity: Color Band Denotes Cathode End . Mounting Position: Any . Weight: 0.34 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. O TYPE NUMBER FR101 FR102 Maximum Recurrent Peak Reverse Voltage 50 100 Maximum RMS Voltage 35 70 Maximum DC Blocking Voltage 50 100 Maximum Average Forward Rectified Current, .375" (9.5mm) Lead Length at Ta = 55 к Peak Forward Surge Current, 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current Ta = 25 к at Rated DC Blocking Voltage Ta = 100 к Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note2) Operating Temperature Range TJ Storage Temperature Range TSTG NOTES: 1. Reverse Recovery Time Test Condition: IF = 0.5A, IR = 1.0A, IRR = 0.25A 2. Measured at 1MHz and Applied Reverse Voltage of 4.0V D.C. http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A FR103 FR104 FR105 FR106 FR107 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 UNITS V V V 1.0 A 30 A 1.3 5.0 100 150 V µA 250 15 -65 ~ +150 -65 ~ +150 500 ns pF к к Any changing of specification will not be informed individual Page 1 of 2 FR101 THRU FR107 VOLTAGE 50V ~ 1000V 1.0 AMP Glass Passivated Fast Rectifier Elektronische Bauelemente ƔRATING AND CHARACTERISTIC CURVES ( FR101 THRU FR107 ) FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE FIG.1-TYPICAL FORWARD CHARACTERISTICS AVERAGE FORWARD CURRENT,(A) 7 10 FR 1~ 10 1.0 FR .1 1.2 1.0 0.8 0.6 Single Phase Half Wave 60Hz 0.4 Resistive Or Inductive Load 0.375"(9.5mm) Lead Length 0.2 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE ( C) Tj=25 C Pulse Width 300us 1% Duty Cycle .01 .001 .4 FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT .6 .8 1.0 1.2 1.4 1.6 1.8 FORWARD VOLTAGE,(V) FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS 50 NONINDUCTIVE 10 NONINDUCTIVE ( ) (+) D.U.T. 25Vdc (approx.) PEAK FORWARD SURGE CURRENT,(A) INSTANTANEOUS FORWARD CURRENT,(A) 10 PULSE GENERATOR (NOTE 2) ( ) 30 24 18 Sine Wave JEDEC method 6 0 1 5 (+) 1 NONINDUCTIVE 8.3ms Single Half Tj=25 C 12 50 10 100 NUMBER OF CYCLES AT 60Hz OSCILLISCOPE (NOTE 1) NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. FIG.5-TYPICAL JUNCTION CAPACITANCE 35 JUNCTION CAPACITANCE,(pF) trr | | | | | | | | +0.5A 0 -0.25A -1.0A 30 25 20 15 10 5 1cm SET TIME BASE FOR 50 / 100ns / cm 0 .01 .05 .1 .5 1 5 10 50 100 REVERSE VOLTAGE,(V) http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 2 of 2