SCS0540P 0.5 A, 40 V Schottky Barrier Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free SOD-123 FEATURES High Current Capability Extremely Low Thermal Resistance For Surface Mount Application Higher Temp Soldering : 250°C for 10 Seconds at Terminals Low Forward Voltage D 1 Cathode Band H G 2 F C B A E J MECHANICAL DATA Case: Molded Plastic Epoxy: UL 94V-0 Rate Flame Retardant Lead: Solderable per MIL-STD-202, method 208 guaranteed Polarity: Color Band Denotes Cathode End Mounting Position: Any REF. A B C D E MARKING CODE BJ Millimeter Min. Max. 0.95 1.35 0.10 REF. 1.05 1.15 0.30 0.78 0.08 0.25 REF. F G H J Millimeter Min. Max. 1.40 1.80 2.55 2.85 3.55 3.85 - MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS(TA=25°C unless otherwise specified) SYMBOL RATING Maximum Recurrent Peak Reverse Voltage PARAMETER VRRM 40 V Working Peak Reverse Voltage VRWM 40 V V Maximum DC Blocking Voltage UNITS VR 40 Average Forward Current @TJ=25°C IF(AV) 0.5 A Peak Forward Current @ 8.3 ms Half Sine IFSM 10 A VF1 0.5 V VF2 0.38 V IR1 0.1 mA IR2 5 mA Maximum Instantaneous Forward Voltage IFM = 0.5 A, TA = 25°C Maximum Instantaneous Forward Voltage IFM = 0.5 A, TA = 125°C Maximum DC Reverse Current At Rated DC Blocking Voltage @ TJ = 25°C Maximum DC Reverse Current At Rated DC Blocking Voltage @ TJ = 125°C Typical Junction Capacitance(Note 1) CJ 160 pF Typical Thermal Resistance (Note 2) RθJA 310 °C/W TJ 150 °C TSTG 150 °C Operating Temperature Range Storage temperature Notes: 1. Measured at 1MHZ and applied reverse of 0V DC. 2. FR-4 PCB, 2 oz. 0.7mm ×1.2mm copper pad. http://www.SeCoSGmbH.com/ 04-Dec-2009 Rev. E Any changes of specification will not be informed individually. Page 1 of 2 SCS0540P 0.5 A, 40 V Schottky Barrier Rectifiers Elektronische Bauelemente RATINGS AND CHARACTERISTIC CURVES Typical Forward Characteristic Typical Junction Capacitance 10 150 100 50 0 100 10 1 0 Instantaneous Forward Current (A) Junction Capacitance (pF) 200 1 125℃ 100℃ 50℃ 75℃ 0.1 25℃ Revise Voltage (%) Typical Forward Current Derating Curve 0.75 0.01 0.1 0.2 0.4 0.3 0.5 0.6 0.7 Average Forward Current (A) Forward Voltage (V) 0.5 Typical Reverse Characteristic 0.25 10 0 0 100 50 150 Tj, Junction Temperature (℃) 125℃ 1 Reverse Current(mA) Maximum Non- Repetitive Forward Surge Current Peak Forwad surge Current (A) 10 8 Tj=25℃ 8.3mS Single half Sine Wave JEDEC Method 6 4 100℃ 0.1 75℃ 50℃ 0.01 25℃ 2 0 0 10 Number of Cycles at 60Hz http://www.SeCoSGmbH.com/ 04-Dec-2009 Rev. E 100 0.001 1 10 20 30 40 50 Reverse Voltage(V) Any changes of specification will not be informed individually. Page 2 of 2