SCS0560V 0.5 A, 60 V Schottky Barrier Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free SOD-323 FEATURES High Current Capability Extremely Low Thermal Resistance For Surface Mount Application Higher Temp Soldering : 250°C for 10 Seconds at Terminals Low Forward Voltage D 1 Cathode Band H G 2 F C B A E J MECHANICAL DATA Case: Molded Plastic Epoxy: UL 94V-0 Rate Flame Retardant Lead: Solderable per MIL-STD-202, method 208 guaranteed Polarity: Color Band Denotes Cathode End Mounting Position: Any REF. A B C D MARKING CODE Millimeter Min. Max. 1.05 REF. 0.20 REF. 0.80 1.00 0.25 0.40 REF. E F G H Millimeter Min. Max. 0.080 0.180 1.15 1.45 1.60 1.80 2.30 2.70 SG MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS(TA=25°C unless otherwise specified) SYMBOL RATING Maximum Recurrent Peak Reverse Voltage PARAMETER VRRM 60 V Working Peak Reverse Voltage VRWM 60 V V Maximum DC Blocking Voltage UNITS VR 60 Average Forward Current @TJ=25°C IF(AV) 0.5 A Peak Forward Current @ 8.3 ms Half Sine IFSM 10 A VF1 0.58 V VF2 0.45 V IR1 50 uA IR2 2 mA Maximum Instantaneous Forward Voltage IFM = 0.5 A, TA = 25°C Maximum Instantaneous Forward Voltage IFM = 0.5 A, TA = 125°C Maximum DC Reverse Current At Rated DC Blocking Voltage @ TJ = 25°C Maximum DC Reverse Current At Rated DC Blocking Voltage @ TJ = 125°C Typical Junction Capacitance(Note 1) CJ 120 pF Typical Thermal Resistance (Note 2) RθJA 488 °C/W TJ 150 °C TSTG 150 °C Operating Temperature Range Storage temperature Notes: 1. Measured at 1MHZ and applied reverse of 0V DC. 2. FR-4 PCB, 2 oz. 0.65mm ×1.35mm copper pad. http://www.SeCoSGmbH.com/ 04-Dec-2009 Rev. A Any changes of specification will not be informed individually. Page 1 of 2 SCS0560V 0.5 A, 60 V Schottky Barrier Rectifiers Elektronische Bauelemente RATINGS AND CHARACTERISTIC CURVES Typical Forward Characteristic 10 Instantaneous Forward Current (A) Typical Junction Capacitance Junction Capacitance (pF) 200 150 100 50 1 125℃ 100℃ 75℃ 50℃ 0.1 25℃ 0 10 1 0 100 Revise Voltage (%) 0.01 0.1 0.2 0.4 0.3 0.5 0.6 0.7 Forward Voltage (V) Typical Reverse Characteristic 1 125℃ Maximum Non- Repetitive Forward Surge Current 0.1 100℃ Reverse Current(mA) Peak Forwad surge Current (A) 10 8 Tj=25℃ 8.3mS Single half Sine Wave JEDEC Method 6 4 2 75℃ 0.01 50℃ 0.001 0 25℃ 0 10 100 Number of Cycles at 60Hz 0.0001 10 20 30 40 50 60 Reverse Voltage(V) http://www.SeCoSGmbH.com/ 04-Dec-2009 Rev. A Any changes of specification will not be informed individually. Page 2 of 2