SF16SD20 Voltage 200 V 16 Amp Low Loss Ultrafast Rectifier Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen free FEATURES TO-220 Ultrafast Recovery Time Low Switching Noise Low Forward Voltage Drop Low Leakage Current High Junction Temperature Application 16 Amperes Total (8 Amperes Per Diode Leg) MECHANICAL DATA Case：TO-220 Molded Plastic Plastic Materials used Carries Underwrites Laboratory Flammability Classification 94V-O Lead Temperature for Soldering Purpose：260°C Max. for 10 Seconds B N M A P H J L K L D E O C G F Dimensions in millimeters REF. A B C D E F G H Millimeter Min. Max. 14.22 16.51 9.65 10.67 12.70 14.73 3.56 4.90 0.51 1.45 2.03 2.92 0.31 0.76 3.6 4.5 REF. J K L M N O P Millimeter Min. Max. 1.09 1.78 0.38 1.02 2.39 2.69 2.50 3.43 3.10 4.09 8.38 9.65 0.89 1.45 ABSOLUTE MAXIMUM RATINGS Parameter Symbol Peak Repetitive Reverse Voltage VRRM Working Peak Reverse Voltage VRWM DC Blocking Voltage VDC RMS Voltage VRMS Average Rectifier Forward Current per Leg Total Device (Rated VR) Peak Repetitive Forward Current per Leg (Rated VR, Square Wave, 20KHz) Non-Repetitive Peak Surge Current Per Leg (Surge applied at rate load conditions half-wave, single phase, 60Hz) Typical thermal resistance junction to Case Operating Junction and Storage Temperature Range http://www.SeCoSGmbH.com/ 14-Feb-2011 Rev. A IF(AV) Values Units 200 V 140 V 8 16 A IFM 16 A IFSM 100 A RθJC 3.5 °C / W TJ, TSTG 175, -55 ~ 175 °C Any changes of specification will not be informed individually. Page 1 of 3 SF16SD20 Voltage 200 V 16 Amp Low Loss Ultrafast Rectifier Elektronische Bauelemente ELECTRICAL CHARACTERISTICS Parameter Breakdown Voltage Instantaneous Forward Voltage Instantaneous Reverse Current Symbol Min. Typ. Max. Units VBR 200 - - V - 0.91 0.95 - - 0.8 - 1.03 1.1 - - 0.92 VF IR - 0.01 5 - 5 100 Test Conditions IF=8A, TJ=25°C IF=8A, TJ=150°C V IF=16A, TJ=25°C IF=16A, TJ=150°C Rated DC Voltage, TJ=25°C A Reverse Recovery Time TRR - 22 30 nS Junction Capacitance CJ - - 30 pF Rated DC Voltage, TJ=150°C IF=0.5A, IR=1A, IREC=0.25A, TJ=25°C VR=200V, TJ=25°C 2 F(RMS) To evaluate the maximum conduction losses use the following equation：PF(av)=0.68 X IF(av) + 0.015 X I http://www.SeCoSGmbH.com/ 14-Feb-2011 Rev. A Any changes of specification will not be informed individually. Page 2 of 3 SF16SD20 Elektronische Bauelemente Voltage 200 V 16 Amp Low Loss Ultrafast Rectifier RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 14-Feb-2011 Rev. A Any changes of specification will not be informed individually. Page 3 of 3