SFP104~SFP105 Voltage 400 and 600 Elektronische Bauelemente 10.0AMP Super Fast Rectifier Diodes RoHS Compliant Product A suffix of "-C" specifies halogen-free ITO-220 Description 10.05 Designed for use in switching power supplies. Inverters and as free wheeling diodes. These state-of-the-art devices have the following feature. 0.05 3.2 0.05 4.3 0.15 0.1 6.6 0.05 0.05 1.2 13.4 Features 0 05 2.7 15.1 0.05 0.05 3.1 * Low Power Loss, High Efficiency * Low Forward Voltage, High Current Capability 2.55 * Low Stored Charge Majority Carrier Conduction 0.05 0.05 0.6 2.55 * High Surge Capacity PIN 1 * Plastic Material Used Carries Underwriters Laboratory PIN 3 * Glass Passivated Chip Junctions o * 150 C Operating Junction Temperature 0.6 2.7 0.05 0.05 0.05 PIN 2 Dimensions in millimeters * High-Switching Speed 50 & 75 Nanosecond Recovery Time Maximum Ratings And Electrical Characteristics Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Recitifier Forward Current (per leg) Total Device (Rated VR),TC=100 C Peak Repetitive Forward Current (Rate VR,Square Wave,20kHz,TC=125 C) Non-Repetitive Peak Surge Current (Surge applied at rate load conditions halfware,single phase, 60Hz) Operating and Storage Temperature Range Maximum Instantaneous Forward Voltage (IF= 5A, TC=25 C) (IF= 5A, TC=125 C) Maximum Instantaneous Reverse Current (Rated DC Voltage, TC=25 C) (Rated DC Voltage, TC=125 C) Reverse Recovery Time (IF=0.5A,IR=1.0,Irr=0.25A) Typical Junction Capacitance (Reverse Voltage of 4V & f=1MHz) http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A Symbol VRRM VRWM VR VR(RMS) SFP104 SFP105 Unit 400 600 V 280 420 V IF(AV) 5.0 10 A IFM 10 A IFSM 100 A Tj,Tstg -65 ~ +150 C VF 1.30 1.16 1.50 1.38 V IR 5.0 200 uA Trr 50 nS CP 70 60 pF Any changing of specification will not be informed individual Page 1 of 2 SFP104~SFP105 Voltage 400 and 600 Elektronische Bauelemente 10.0AMP Super Fast Rectifier Diodes FIG-3 FORWARD CURRENT DERATING CURVE SFP104 AVERAGE FORWARD RECTIFIED CURRENT (Amp.) AVERAGE FORWARD RECTIFIED CURRENT (Amp.) FIG-1 TYPICAL FORWARD CHARACTERISITICS SFP 105 LEAD TEMPERATURE (℃) FIG-4TYPICAL JUNCTION CAPACITANCE INSTANTANEOUS REVERSE CURRENT (uA.) FIG-2 TYPICAL REVERSE CHARACTERISTICS JUNCTION CAPACITANCE (PF) FORWARD VOLTAGE (Volts) SFP105 SFP104 REVERSE VOLTAGE (Volts.) SFP104 SFP104 SFP105 SFP105 PERCENT OF PEAK REVERSE VOLTAGE (﹪) PEAK FORWARD SURGE CURRENT (Amp.) FIG-5PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 Hz Set time base for 10/20 ns/cm FIG-6 Reverse Recovery Time Characteristic and Test Circuit Diagram http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 2 of 2