SM0520FL VOLTAGE 20 V 0.5 A Glass Passivated Surface Mount Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES Low profile package For surface mounted applications Ideal for automated placement Low power loss, high efficiency High temperature soldering: 250°C / 10 seconds at terminals SOD-123FL A F B MECHANICAL DATA Case: JEDEC SOD-123FL, molded plastic over passivated chip Terminals: Solder Plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.006 ounces, 0.02 gram G C E MARKING REF. Product Marking Code SM0520FL B2 Millimeter Min. Max. D REF. Millimeter Min. Max. A 2.70 2.90 E 0.10 B 2.00 1.80 F 0.80 0.30 1.20 C 1.55 1.25 G 0.35 0.85 D 3.50 3.90 PACKAGE INFORMATION Package MPQ LeaderSize SOD-123FL 2.5K 7’ inch MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25°C ambient temperature unless otherwise specified.Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL VALUE UNITS Maximum repetitive peak reverse voltage VRRM 20 V Maximum working peak reverse voltage VRWM 20 V Maximum DC blocking voltage VR 20 V Maximum average forward rectified current at rated VR @ TL = 129°C I(AV) 0.5 A Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load @ TL = 25°C IFSM 6.5 A Typical thermal resistance to ambient (NOTE 1) RθJA 200 °C / W Typical thermal resistance to lead (NOTE 2) RθJL 25 °C / W TJ -55 ~ 150 °C TSTG -55 ~ 150 °C PARAMETERS Operating Temperature Range Storage Temperature Range NOTES:1. Mounted on epoxy substrate with 3 x 3 mm CU pads (≧ 40 m thick). 2. Mounted with minimum recommended pad size, PC board FR4. http://www.SeCoSGmbH.com/ 18-Nov-2010 Rev. A Any changes of specification will not be informed individually. Page 1 of 3 SM0520FL VOLTAGE 20 V 0.5 A Glass Passivated Surface Mount Rectifiers Elektronische Bauelemente PARAMETERS SYMBOL IF=0.1A, TJ=25°C MIN TYP. MAX - - 0.375 - - 0.260 UNIT Maximum instantaneous forward voltage IF=0.1A, TJ=100°C (NOTE 3) IF=0.5A, TJ=25°C - - 0.440 IF=0.5A, TJ=100°C - - 0.360 VR=10V, TJ=25°C - - 40 A - - 3.0 mA VR=20V, TJ=25°C - - 150 A VR=20V, TJ=100°C - - 7.0 mA - - 110 pF Maximum DC reverse current at rated DC blocking voltage V VF VR=10V, TJ=100°C IR Max.junction capacitance (NOTE 4) CT NOTES:3. Pulse test < 300S, duty cycle < 2%. 4. VR = 5VDC (test signal range 100KHz to 1MHz) http://www.SeCoSGmbH.com/ 18-Nov-2010 Rev. A Any changes of specification will not be informed individually. Page 2 of 3 SM0520FL Elektronische Bauelemente VOLTAGE 20 V 0.5 A Glass Passivated Surface Mount Rectifiers RATINGS AND CHARACTERISTIC CURVES (SM0520FL) http://www.SeCoSGmbH.com/ 18-Nov-2010 Rev. A Any changes of specification will not be informed individually. Page 3 of 3