SMP600G-EL MECHANICAL DATA Dimensions in mm. P.I.N. PHOTODIODE FEATURES 3.8 ± 0.2 WINDOW Ø 5.9 ± 0.1 Ø 9.1 ± 0.2 Ø 8.1 ± 0.1 HIGH SENSITIVITY EYE RESPONSE DETECTION EXCELLENT LINEARITY LOW NOISE WIDE SPECTRAL RESPONSE BG18 INTEGRAL OPTICAL FILTER TO39 HERMETIC METAL CAN PACKAGE EMI SCREENING MESH AVAILABLE 20 SE NSITIVE SURF ACE • • • • • • • • Ø 0.45 LEAD 5.08 ± 0.2 DESCRIPTION 2 1 TO-39 Package Pin 1 – Anode Pin 2 –Cathode & Case The SMP600G-EL is a Silicon P.I.N. photodiode incorporated in a hermetic metal can package. The electrical terminations are via two leads of diameter 0.018" on a pitch centre diameter of 0.2". The can structure incorporates an photoptic response optical filter with peak transmission at 510nm. The cathode of the photodiode is electrically connected to the package. The larger photodiode active area provides greater sensitivity than the SMP550 range of devices, with a slight reduction in speed. Inherent in the device geometry is a reduction in the receiving angle. The photodiode structure has been optimised for high sensitivity, asymmetric light measurement applications. The metal can, isolated photodiode and optional screening mesh ensure a rugged device with a high degree of immunity to conducted and radiated electrical interference. ABSOLUTE MAXIMUM R ATINGS(Tcase = 25°C unless otherwise stated) Operating temperature range Storage temperature range Temperature coefficient of responsively Temperature coefficient of dark current Reverse breakdown voltage Semelab plc . Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612. -40°C to +70°C -45°C to +80°C 0.35% per °C x2 per 8°Crise 60V Prelim. 1/98 SMP600G-EL CHARACTERISTICS (Tamb=25°C unless otherwise stated) Characteristic Test Conditions. λ at 900nm Responsively Min. Typ. 0.45 0.55 A/W 15 mm2 Active Area Dark Current Breakdown Voltage Capacitance 2 E = 0 Dark 1V Reverse E = 0 Dark 10V Reverse E = 0 Dark 10µA R e verse E = 0 Dark 0V Reverse 90 E = 0 Dark 20V Reverse 25 60 V pF ns 20x10-14 900nm Units nA 12 50Ω NEP 6 80 30V Reverse Rise Time Max. 0.45 W/√Hz Directional characteristics Directional Characteristics 80° 1 1 Angle from sensor to illumination 70° 0.9 60° 0.8 0.8 Normalised Incident Power 50° 40° 0.6 30° 0.4 20° 0.7 0.6 0.5 0.4 0.3 0.2 0.2 10° 0.1 0 0 0 0.2 0.4 0.6 0.8 0 1 10 20 30 40 50 60 70 80 90 Angle from sensor to illumination Normalised incident power Spectral Response Relative Responsivity (%) 100 80 60 40 20 0 0 Semelab plc. 200 400 600 Wavelength (nm) 800 Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612. 1000 1200 Prelim. 1/98