SHD116136 SHD116136B SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 331, REV. C ULTRA LOW REVERSE LEAKAGE POWER SCHOTTKY RECTIFIER Very Low Voltage Drop DESCRIPTION: 200 VOLT, 7.5 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-1 OR -1B PACKAGE. MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED. RATING SYMBOL MAX. UNITS PIV 200 Volts IO 7.5 Amps IFSM 140 Amps CT 150 pF MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) RθJC 3.2 °C/W MAXIMUM OPERATING TEMPERATURE RANGE Top -65 to + 200 °C MAXIMUM STORAGE TEMPERATURE RANGE Tstg -65 to + 175 °C Vf 0.92 Volts PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 OC) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t = 8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE (Vr =5V) (per leg) ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 7.5 Amps) TJ = 25 °C TJ = 125 °C 0.76 MAXIMUM REVERSE CURRENT (Ir @ 200V PIV) TJ = 25 °C Ir TJ = 125 °C REVERSE RECOVERY TIME 0.05 mA 0.5 trr 12 ©1999 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • @sensitron.com ns SHD116136 SHD116136B SENSITRON TECHNICAL DATA DATA SHEET 331, REV. C Typical Reverse Characteristics Typical Forward Characteristics 1 10 200 °C Instantaneous Reverse Current - I R (mA) 101 175 °C 100 150 °C -1 10 125 °C 100 °C 10-2 75 °C 10-3 50 °C 10-4 25 °C -1 10 10-5 125 °C 0 40 80 120 160 Reverse Voltage - VR (V) 200 240 Typical Junction Capacitance 25 °C 10-2 10-3 0.0 0.2 0.4 0.6 0.8 Forward Voltage Drop - VF (V) 1.0 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 200 °C 175 °C 100 120 80 40 0 0 40 80 120 160 Reverse Voltage - VR (V) ©1999 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • @sensitron.com 200 240 SHD116136 SHD116136B SENSITRON TECHNICAL DATA DATA SHEET 331, REV. C MECHANICAL DIMENSIONS: In Inches / mm .375±.020 (9.52±.508) .225± .010 (5.71± .254) .225±.010 (5.71±.254) .225± .010 (5.71± .254) .150±.010 (3.81±.254) .225±.010 (5.71±.254) .015±.005 (.381±.127) Copper Anode .090 (2.29) Max .075 (1.91) M ax M oly Lid .020±.005 R (.508±.127 ) Alumina Ring A lum ina R ing M oly Base Moly Base (Cathode) .015±.002 (.381±.051) .060±.010 (1.52±.254) SHD-1 SHD-1B DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©1999 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • @sensitron.com