SENSITRON SEMICONDUCTOR SHD120212 TECHNICAL DATA DATA SHEET 680, REV. B HERMETIC POWER SCHOTTKY RECTIFIER Very Low Forward Voltage Drop DESCRIPTION: A 45 VOLT, 15 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC LCC-5 PACKAGE. MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. RATING SYMBOL MAX. UNITS PIV 45 Volts IO 15 Amps MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t = 8.3ms, Sine) IFSM 150 Amps MAXIMUM JUNCTION CAPACITANCE CT 800 pF 2.65 C/W Top/Tstg -65 to + 150 C SYMBOL MAX. UNITS Vf 0.65 Volts PEAK INVERSE VOLTAGE O MAXIMUM DC OUTPUT CURRENT (@ TC=100 C) (Vr = 5V, TJ, = 25 C, fSIG = 1MHz, VSIG = 50mV P-P)) MAXIMUM THERMAL RESISTANCE (Junction to Case) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE R JC ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 15 Amps) TJ = 25 C 0.60 TJ = 125 C MAXIMUM REVERSE CURRENT (Ir @ 45 V PIV) TJ = 25 C TJ = 125 C Ir 1.5 70 Note: VF Curves are shown for die only. 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] mA SHD120212 TECHNICAL DATA DATA SHEET 680, REV. B MECHANICAL DIMENSIONS: IN Inches / mm LCC-5 PINOUT TABLE DEVICE TYPE DUAL RECTIFIER, COMMON CATHODE (P) PIN 1 CATHODE PIN 2 ANODE Typical Reverse Characteristics Instantaneous Reverse Current - I R (mA) Typical Forward Characteristics 101 150 °C 102 150 °C 1 10 125 °C 100 °C 100 75 °C -1 10 50 °C 10-2 25 °C 125 °C 0 10 10-3 0 25 °C Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) PIN 3 ANODE 10-1 0.0 0.2 0.4 0.6 Forward Voltage Drop -FV(V) 0.8 10 20 30 40 Reverse Voltage - RV (V) 50 Typical Junction Capacitance 800 700 600 500 400 300 200 0 10 20 30 40 Reverse Voltage - RV (V) 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] 50 SHD120212 TECHNICAL DATA DATA SHEET 680, REV. B DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]