SENSITRON SHD124436P

SHD124436
SHD124436P
SHD124436N
SHD124436D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 1191, REV. A
ULTRA LOW REVERSE LEAKAGE POWER SCHOTTKY RECTIFIER
Very Low Voltage Drop
DESCRIPTION: A 200 VOLT, 30/45 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC TO-258 PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED.
RATING
PEAK INVERSE VOLTAGE
MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 OC)
Single / Doubler
SYMBOL
MAX.
UNITS
PIV
200
Volts
IO
Amps
30
Common Cathode / Common Anode
45
MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
(t=8.3ms, Sine Wave) (per leg)
IFSM
200
Amps
MAXIMUM JUNCTION CAPACITANCE (Vr =5V)
CT
600
pF
MAXIMUM THERMAL RESISTANCE
°C/W
RθJC
Dual Rectifier Common Cathode / Common Anode / Doubler
0.39
Single Rectifier
0.77
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
Top
-65 to
+ 175
°C
SYMBOL
MAX.
UNITS
Vf
1.09
Volts
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 30 Amps) (per leg)
TJ = 25 °C
TJ = 125 °C
0.93
MAXIMUM REVERSE CURRENT (Ir @ 200V PIV) (per leg)
TJ = 25 °C
TJ = 125 °C
Ir
0.2
2.0
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •
mA
SHD124436
SHD124436P
SHD124436N
SHD124436D
SENSITRON
DATA SHEET 1191, REV. A
MECHANICAL DIMENSIONS: In Inches / mm
.165 (4.19
Dia.
.155 3.94)
.270 (6.86
.240 6.10)
.695 (17.65
.685 17.40)
SINGLE
COMMON CATHODE
.045 (1.14
.035 0.89)
.835 (21.21
.815 20.70)
.707 (17.96
.697 17.70)
1.302 (33.07
1.202 30.53)
1
2
1
.550 (13.97
.530 13.46)
2
.140(3.56) BSC
PINOUT TABLE
TYPE
SINGLE RECTIFIER
DUAL RECTIFIER, COMMON CATHODE (P)
DUAL RECTIFIER, COMMON ANODE (N)
DOUBLER (D)
Vf curves are for bare die only.
2
3
DOUBLER
3
3
2
1
TO-258
PIN 1
CATHODE
ANODE 1
CATHODE 1
ANODE
PIN 2
ANODE
COMMON CATHODE
COMMON ANODE
ANODE/CATHODE
PIN 3
ANODE
ANODE 2
CATHODE 2
CATHODE
Typical Reverse Characteristics
Typical Forward Characteristics
Instantaneous Reverse Current - I R (mA)
101
200 °C
175 °C
100
200 °C
175 °C
100
150 °C
10-1
125 °C
100 °C
10-2
75 °C
10-3
50 °C
10-4
25 °C
10-5
125 °C
0
40
80
120
160
Reverse Voltage - VR (V)
200
240
Typical Junction Capacitance
10-1
25 °C
10-2
0.0
0.2
0.4
0.6
0.8
Forward Voltage Drop - V F (V)
1.0
Junction Capacitance - CT (pF)
Instantaneous Forward Current - I F (A)
2
COMMON ANODE
.200(5.08) BSC
2 Places
101
1
3
1
.065 (1.65
.055 1.40)
3 Places
3
600
450
300
150
0
0
40
80
120
160
Reverse Voltage - VR (V)
200
240
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •
SENSITRON
DATA SHEET 1191, REV. A
SHD124436
SHD124436P
SHD124436N
SHD124436D
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected]