SENSITRON SHD124444

SHD124444
SHD124444P
SHD124444N
SHD124444D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 1159, REV. -
HERMETIC POWER SCHOTTKY RECTIFIER
200•C Maximum Operation Temperature
DESCRIPTION: A 100 VOLT, 30/45 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC TO-258
PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PIV
100
Volts
O
IO
30
Amps
O
IO
45
Amps
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t=8.3ms, Sine)
IFSM
200
Amps
MAXIMUM JUNCTION CAPACITANCE
CT
1000
pF
JC
0.77
•C/W
JC
0.39
•C/W
PEAK INVERSE VOLTAGE
MAXIMUM DC OUTPUT CURRENT (@ TC=100 C) (Single, Doubler)
MAXIMUM DC OUTPUT CURRENT (@ TC=100 C)
(Common Cathode, Common Anode)
(Vr =5V)
MAXIMUM THERMAL RESISTANCE (Single)
R
MAXIMUM THERMAL RESISTANCE
(Common Cathode, Common Anode, Doubler)
R
MAXIMUM OPERATING TEMPERATURE RANGE
Top/Tstg
-65 to
+ 200
•C
MAXIMUM STORAGE TEMPERATURE RANGE
Top/Tstg
-65 to
+ 175
•C
SYMBOL
MAX.
UNITS
Vf
1.01
Volts
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 30 Amps)
TJ = 25 •C
TJ = 125 •C
MAXIMUM REVERSE CURRENT (Ir @ 100 V PIV)
TJ = 25 •C
TJ = 125 •C
0.85
Ir
0.75
15
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web Site - http://www.sensitron.com E-mail Address - [email protected]
mA
SHD124444
SHD124444P
SHD124444N
SHD124444D
SENSITRON
DATA SHEET 1159, REV. Mechanical Dimensions: In inches / mm
.165 (4.19
Dia.
.155 3.94)
SINGLE
.270 (6.86
.240 6.10)
.695 (17.65
.685 17.40)
COMMON CATHODE
.045 (1.14
.035 0.89)
1
.835 (21.21
.815 20.70)
.707 (17.96
.697 17.70)
1.302 (33.07
1.202 30.53)
1
2
2
3
1
2
COMMON ANODE
.550 (13.97
.530 13.46)
3
DOUBLER
3
1
.065 (1.65
.055 1.40)
3 Places
.200(5.08) BSC
2 Places
.140(3.56) BSC
PINOUT TABLE
TYPE
SINGLE RECTIFIER
DUAL RECTIFIER, COMMON CATHODE (P)
DUAL RECTIFIER, COMMON ANODE (N)
DUAL RECTIFIER, DOUBLER (D)
Curves shown are for bare die only.
2
3
1
2
TO-258
PIN 1
CATHODE
ANODE 1
CATHODE 1
ANODE
Typical Forward Characteristics
PIN 2
ANODE
COMMON CATHODE
COMMON ANODE
CATHODE/ ANODE
PIN 3
ANODE
ANODE 2
CATHODE 2
CATHODE
Typical Reverse Characteristics
2
10
200 °C
Instantaneous Reverse Current - IR (mA)
101
200 °C
Instantaneous Forward Current - IF (A)
101
175 °C
100
125 °C
0.3
0.4
0.5
0.6
0.7
Forward Voltage Drop - V F (V)
0.8
Junction Capacitance - CT (pF)
10-2
0.2
150 °C
100
125 °C
10-1
100 °C
75 °C
10-2
50 °C
10
-3
10
-4
25 °C
20
40
60
80
Reverse Voltage - VR (V)
100
120
Typical Junction Capacitance
10-1
0.1
175 °C
0
25 °C
3
900
800
700
600
500
400
300
200
100
0
20
40
60
80
Reverse Voltage - VR (V)
100
120
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web Site - http://www.sensitron.com E-mail Address - [email protected]
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected]