SENSITRON SHD225602

SENSITRON
SEMICONDUCTOR
SHD225602
TECHNICAL DATA
DATA SHEET 473, REV. -
HERMETIC POWER MOSFET
N-CHANNEL
FEATURES:
œ 100 Volt, 75A, 0.025 Ohm, MOSFET
œ Isolated Hermetic Metal Package
œ Fast intrinsic Rectifier
œ Low RDS (on)
œ Low package inductance-easy to drive and protect
œ Similar Part Type - IXTD75N10
MAXIMUM RATINGS
ALL RATINGS ARE AT TC = 25 C UNLESS OTHERWISE SPECIFIED.
RATING
GATE TO SOURCE VOLTAGE
ON-STATE DRAIN CURRENT @ TC = 25•C
PULSED DRAIN CURRENT @ TC = 25•C
OPERATING AND STORAGE TEMPERATURE
THERMAL RESISTANCE, JUNCTION TO CASE
TOTAL DEVICE DISSIPATION @ TC = 25•C
ELECTRICAL CHARACTERISTICS
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = 250 mA
STATIC DRAIN TO SOURCE ON STATE RESISTANCE
VGS = 10V, ID = 37.5A
GATE THRESHOLD VOLTAGE
VDS = VGS, ID = 4mA
FORWARD TRANSCONDUCTANCE
VDS ˜ 10V, ID = 75A
ZERO GATE VOLTAGE DRAIN CURRENT
VDS = 0.8xMax. Rating, VGS = 0V
VDS = 0.8xMax. Rating, VGS = 0V, TC = 125•C
GATE TO SOURCE LEAKAGE FORWARD
VGS = 20V
GATE TO SOURCE LEAKAGE REVERSE
VGS = -20V
TURN ON DELAY TIME
VDS = 0.5V,
RISE TIME
ID = 37.5A,
TURN OFF DELAY TIME
RG = 2.0W,
FALL TIME
VGS = 10V
DIODE FORWARD VOLTAGE
TC = 25•C, IS = 75A,
VGS = 0V
REVERSE RECOVERY TIME
TJ = 25•C
If = 25A, di/dt = 100A/msec, Vr = 25V
INPUT CAPACITANCE
VGS = 0 V
OUTPUT CAPACITANCE
VDS = 25 V
REVERSE TRANSFER CAPACITANCE
f = 1.0MHz
SYMBOL
VGS
ID (on)
IDM
TOP/TSTG
RthJC
PD
MIN.
-55
-
TYP.
-
MAX.
–20
75
–300
+150
0.32
390
UNITS
Volts
Amps
Amps
•C
•C/W
Watts
BVDSS
100
-
-
Volts
-
-
2.0
25
30
0.025
4.0
-
W
Volts
S(1/W)
250
1.0
100
-100
30
110
110
90
1.75
mA
mA
nA
Volts
nsec
RDS(ON)
VGS(th)
gfs
IDSS
-
-
IGSS
-
td(ON)
tr
td(OFF)
tf
VSD
-
-
20
60
80
60
-
trr
-
-
200
Ciss
Coss
Crss
-
4500
1600
800
-
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web Site - www.sensitron.com E-mail Address - [email protected]
nsec
pF
SHD225602
SENSITRON
DATA SHEET 473
REVISION -
MECHANICAL DIMENSIONS: in Inches / mm
.149 (3.78
Dia.
.139 3.53)
(6.60
6.32)
(1.27
1.02)
.800 (20.32
.790 20.07) .545 (13.84
.535 13.58)
.685 (17.40
.665 16.89)
1.235 (31.37
1.195 30.35)
.260
.249
.050
.040
.545 (13.84
.535 13.60)
1
.045 (1.14
.035 0.89)
3 Places
2
3
.150(3.81) BSC
2 Places
.150(3.81) BSC
TO-254
PINOUT TABLE
DEVICE TYPE
MOSFET IN A
TO-254 PACKAGE
PIN 1
DRAIN
PIN 2
SOURCE
PIN 3
GATE
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web Site - www.sensitron.com E-mail Address - [email protected]
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected]