SEOUL SSC

Technical Data Sheet
Specification
SSC-GR202
(Rev 1.0, General)
SSC
Drawn
Approval
Customer
Approval
SSCSSC-GR202
Revision 1.0
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Technical Data Sheet
[ Contents ]
1.
Absolute maximum ratings
2.
Electro-optical characteristics
3.
Characteristic diagram
4.
Soldering profile
5.
Outline dimension
6.
Packing
7.
Reel packing structure
8.
Precaution for use
SSCSSC-GR202
Revision 1.0
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Technical Data Sheet
SSC-GR202
Description
-
SSC-GR202
Features
Small size suitable for compact
appliances
• 3.0 X 1.5 X 1.4 mm
• Inner Lens type, Clear mold
-
Surface-mounted and leadless chip
LED device
-
• Wavelength : 570 nm
High brightness, wide variety of colors
are available
Applications
-
Tape and Reel packing
-
Increases the life time of battery
• Decoration lighting
SSCSSC-GR202
Revision 1.0
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Technical Data Sheet
1. Absolute maximum ratings
(Ta=25℃)
Parameter
Symbol
Value
Unit
Power Dissipation
Pd
75
mW
Forward Current
IF
30
mA
Peak Forward Current
IFM *1
50
mA
Reverse Voltage
VR
5
V
Operation Temperature
Topr.
-30 ~ 85
℃
Storage Temperature
Tstg.
-40 ~ 100
℃
*1 IFM conditions: Pulse width Tw≤0.1ms and Duty ratio≤1/10
2. Electro-Optical Characteristics
(Ta=25℃)
Parameter
Symbol
Condition
Min
Typ
Max
Unit
Forward Voltage
VF
IF=20 ㎃
1.8
2.1
2.5
V
Reverse Current
IR
VR=5V
-
-
10
㎂
Luminous Intensity*2
IV
IF=20 ㎃
35
-
60
mcd
Wavelength
λp
IF=20 ㎃
568
570
574
nm
Spectral Bandwidth
Δλ
IF=20 ㎃
20
nm
Viewing Angle*3
2θ1/2
IF=20 ㎃
70
˚
*2 The luminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the
LED package.
*3 θ1/2 is the off-axis where the luminous intensity is 1/2 the peak intensity.
[Note] All products confirm to the listed minimum and maximum specifications for electric and optical characteristics, when operated at
20mA within the maximum ratings shown above. All measurements were made under the standardized environment of SSC.
(Tolerance : Iv ±10 %, λD ±2 nm, VF ±0.1 V)
SSCSSC-GR202
Revision 1.0
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Technical Data Sheet
3. Characteristic Diagram
Forward Current vs Forward Voltage
Relative Intensity vs Forward Current
100
140
Relative Intensity IV(%)
Forward Current IF(mA)
120
10
100
80
60
40
20
0
1
1.9
2.0
2.1
2.2
0
2.3
5
Forward Voltage VF(V)
10
15
20
25
30
35
Forward Current IF(mA)
Forward Current vs Derating Curve
Radiation Diagram
40
-20°
+20°
0
.
1
30
40°
+40°
20
5
.
0
Forward current IF(mA)
0°
60°
+60°
80°
+80°
90°
+90°
10
0
-25
0
25
50
75
100
o
Ambient temperature Ta( C
X
SSCSSC-GR202
Revision 1.0
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Technical Data Sheet
4. Soldering profile
Reflow Soldering Conditions/ Profile
(1) Lead Solder
• Preliminary heating to be at 150℃max. for 2 minutes max.
• Soldering heat to be at 240℃max. for 5 seconds max.
(2) Lead-Free Solder
• Preliminary heating to be at 150℃max. for 2 minutes max.
• Soldering heat to be at 260℃max. for 10 seconds max.
(3) Hand Soldering Condition
• Not more than 3 seconds @MAX280℃, under Soldering iron.
[Note] In case the soldered products are reused in soldering process, we don’t guarantee the products.
SSCSSC-GR202
Revision 1.0
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Technical Data Sheet
5. Outline Dimension
Tolerance: ±0.1, Unit: ㎜
6. Packing
Tolerance: ±0.2, Unit: ㎜
(1) Quantity: 3,000pcs./Reel
(2) Cumulative Tolerance: Cumulative Tolerance/10pitches to be ±0.2mm
(3) Adhesion Strength of Cover Tape: Adhesion strength to be 0.1-0.7N when the over tape is
turned off from the carrier tape at10˚angle to be the carrier tape.
(4) Package: P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof
Package.
SSCSSC-GR202
Revision 1.0
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Reel
#
#
#
#
#
#
#
#
#
#
:
N
/
P
##
제품명 : SSC-GR202
#
#
#
#
#
#
#
#
#
#
o
N
t
o
L
Technical Data Sheet
7. Reel Packing Structure
수량 : 3000
Aluminum Vinyl Bag
#
#
#
#
#
#
#
#
#
#
:
N
/
P
##
제품명 : SSC-GR202
#
#
#
#
#
#
#
#
#
#
o
N
t
o
L
수량 : 3000
Outer Box
*Material: Paper(SW3B(B))
SIZE(mm)
a
c
b
7inch 245 220 142
TYPE
c
CHIP LED
PART : SSC-GR202
CODE :
Q'YT : 30,000EA
CHIP LED
b
a
LOT NO :
DATE :
SEOUL SEMICONDUCTOR CO.,LTD
SSCSSC-GR202
Revision 1.0
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Technical Data Sheet
8. Precaution for Use
(1) Storage
In order to avoid the absorption of moisture, it is recommended to store in the dry box (or
desiccator) with a desiccant. Otherwise, to store them in the following environment is
recommended.
Temperature : 5℃~30℃ Humidity : 60%HR max.
(2) Attention after opened
However LED is corresponded SMD, when LED be soldered dip, interfacial separation may
affect the light transmission efficiency, causing the light intensity to drop. Attention in followed.
a. After opened and mounted, the soldering shall be quickly.
b. Keeping of a fraction
Temperature : 5 ~ 40℃
Humidity : less than 30%
(3) In case of more than 1 week passed after opening or change color of indicator on desiccant
components shall be dried 10-12hr. at 60±5℃.
(4) In case of supposed the components is humid, shall be dried dip-solder just before.
100Hr at 80±5℃ or 12Hr at 100±5℃.
(5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling
process to normal temp. after soldering.
(6) Quick cooling shall not be avoid.
(7) Components shall not be mounted on warped direction of PCB.
(8) Anti radioactive ray design is not considered for the products listed here in.
(9) Gallium arsenide is used in some of the products listed in this publication. These products are
dangerous if they are burned or smashed in the process of disposal. It is also dangerous to
drink the liquid or inhale the gas generated by such products when chemically disposed.
(10) This device should not be used in any type of fluid such as water, oil, organic solvent and etc.
When washing is required, IPA should be used.
(11) When the LEDs are illuminating, operating current should be decided after considering the
ambient maximum temperature.
(12) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or
more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be
used for storage.
(13) The LEDs must be soldered within seven days after opening the moisture-proof packing.
(14) Repack unused products with anti-moisture packing, fold to close any opening and then
store in a dry place.
(15) The appearance and specifications of the product may be modified for improvement without
notice.
SSCSSC-GR202
Revision 1.0
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)