SMD POWER INDUCTORS PDB1608 SERIES 1. PART NO. EXPRESSION : PDB16081R0MZF (a) (b) (c) (d)(e)(f) (a) Series code (d) Tolerance code : M = ±20% (b) Dimension code (e) X, Y, Z : Standard part (c) Inductance code : 1R0 = 1.0uH (f) F : RoHS Compliant 2. CONFIGURATION & DIMENSIONS : C G I J I H E D A 101 F B PCB Pattern Epoxy A B Unit:m/m C 6.60 Max. 4.45 Max. 2.92 Max. D E F G H I J 3.94 Ref. 4.32 Ref. 1.02 Ref. 1.27 Ref. 3.56 Ref. 1.40 Ref. 4.06 Ref. 3. SCHEMATIC : 4. MATERIALS : c (a) Wire (b) Base a b (c) Ink (d) Epoxy d 5. GENERAL SPECIFICATION : a) Test Frequency : 100KHz, 0.1Vrms, 0Adc b) ǻL/L0A : 10% Typ. at Idc c) Storage temp. : -40°C to +125°C d) Operating temp. : -40°C to +85°C NOTE : Specifications subject to change without notice. Please check our website for latest information. 11.05.2010 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 1 SMD POWER INDUCTORS PDB1608 SERIES 6. ELECTRICAL CHARACTERISTICS : Inductance ( µH ) Test Frequency ( Hz ) RDC ( mȍ ) Max. IDC (A) Max. PDB16081R0MZF 1.0±20% 0.1V/100K 50 2.90 PDB16081R5MZF 1.5±20% 0.1V/100K 60 2.60 PDB16082R2MZF 2.2±20% 0.1V/100K 70 2.30 PDB16082R7MZF 2.7±20% 0.1V/100K 80 2.10 PDB16083R3MZF 3.3±20% 0.1V/100K 80 2.00 PDB16084R7MZF 4.7±20% 0.1V/100K 90 1.50 1.20 Part No. PDB16086R8MZF 6.8±20% 0.1V/100K 130 PDB16088R2MZF 8.2±20% 0.1V/100K 160 1.15 PDB1608100MZF 10.0±20% 0.1V/100K 160 1.10 PDB1608150MZF 15.0±20% 0.1V/100K 230 0.90 PDB1608220MZF 22.0±20% 0.1V/100K 370 0.70 PDB1608330MZF 33.0±20% 0.1V/100K 510 0.58 PDB1608470MZF 47.0±20% 0.1V/100K 640 0.50 PDB1608680MZF 68.0±20% 0.1V/100K 860 0.40 PDB1608101MZF 100.0±20% 0.1V/100K 1270 0.31 PDB1608151MZF 150.0±20% 0.1V/100K 2000 0.27 PDB1608221MZF 220.0±20% 0.1V/100K 3110 0.22 0.18 PDB1608331MZF 330.0±20% 0.1V/100K 3800 PDB1608471MZF 470.0±20% 0.1V/100K 5060 0.16 PDB1608681MZF 680.0±20% 0.1V/100K 9200 0.14 PDB1608102MZF 1000.0±20% 0.1V/100K 13800 0.10 Temperature (°C) Peak Temp : 260°C max. Max time above 230°C : 50sec max. Max time above 200°C : 70sec max. Temp. Rising Area Preheat Area +40°C/sec max. 150~200°C/60~120sec Forced Cooling Area Reflow area +2.0~ 4.0°C/ sec max. -(1.0~5.0)°C/sec max. Peak temperature 260°C 250 230°C 50sec max. 200 150 70sec max. 100 50 0 50 100 150 200 250 Time (seconds) NOTE : Specifications subject to change without notice. Please check our website for latest information. 11.05.2010 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 2 SMD POWER INDUCTORS PDB1608 SERIES 7. CHARACTERISTICS CURVES : INDUCTANCE CURVE VS. CURRENT INDUCTANCE (uH) 9.00 8.00 7.00 6.00 5.00 4.00 3.00 2.00 1.00 0.00 0A 0.5A 1.15A 1.5A 2A 2.5A 3A DC CURRENT DC CURRENT((A) A) TEMPERATURE RISE (°C) T EMPERATURE RISE CURVE VS. CURRENT 70.00 60.00 50.00 40.00 30.00 20.00 10.00 0.00 0A 0.4A 0.8A 1.15A 1.6A 2.0A DC A) DC CURRENT( CURRENT (A) NOTE : Specifications subject to change without notice. Please check our website for latest information. 11.05.2010 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 SMD POWER INDUCTORS PDB1608 SERIES 8. PACKAGING INFORMATION : ( 1 ) CONFIGURATION B A B C D 13-16 16.5 2.3 100 330 D C STYLE E A 8.0±0.1 Po 1 .5 ±0 .1 0.35±0.05 W 101 101 101 101 101 6.9±0.1 F P2 4.55±0.1 3.2±0.1 ( 2 ) DIMENSIONS STYLE E F P2 Po W 13-16 1.75±0.1 7.5±0.1 2.0±0.1 4.0±0.1 16.0±0.3 ( 3 ) Q'TY & G.W. PER PACKAGE Inner Carton Reel SERIES PDB1608 Outer Carton Qty Reel Qty (pcs) Size (mm) Reel Qty (pcs) Size (mm) 2000 3 6000 345x340x70 6 12000 360x350x156 NOTE : Specifications subject to change without notice. Please check our website for latest information. 11.05.2010 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 4 SMD POWER INDUCTORS PDB1608 SERIES (4) Tearing Off Force The force for tearing off cover tape is 5 to 120 grams in the arrow direction under the following conditions. F 165° to 180° Top cover tape Room Temp. (°C) Room Humidity (%) Room atm (hPa) Tearing Speed (mm/min) 5~35 45~85 860~1060 300 Base tape Application Notice 1. Storage Conditions : To maintain the solderabililty of terminal electrodes : a) Temperature and humidity conditions : Less than 40°C and 70% RH. b) Recommended products should be used within 6 months from the time of delivery. c) The packaging material should be kept where no chlorine or sulfur exists in the air. 2. Transportation : a) Products should be handled with care to avoid damage or contamination from perspiration and skin oils. b) The use of tweezers or vacuum pick up is strongly recommended for individual components. c) Bulk handling should ensure that abrasion and mechanical shock are minimized. NOTE : Specifications subject to change without notice. Please check our website for latest information. 11.05.2010 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 5