TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com IF SAW Filter 153.6MHz(BW=20MHz) SMD 5.0X7.0mm MODEL NO.: TB0772A REV.1.0 A. MAXIMUM RATING: 1. Operating Temperature: -0 °C ~ +70 °C 2. Storage Temperature: -40 °C ~ +85 °C 3. Input power: 10dBm RoHS Compliant Lead free Lead-free soldering B. Characteristics : Ambient Temperature: 25 °C Characteristics Value Typ. Min. Center frequency FC Minimum Insertion loss I.L. 1dB BW Passband Ripple (FC ± 10.0MH) MHz dB MHz dB 20 - Max. - 153.6 9.5 23.18 0.45 13.0 1.0 19.5 26 -94 - Attenuation (Reference to Minimum Insertion loss) 139.6MHz dB 10 168.6MHz dB 10 Temp Coefficient ppm/K Matching: 1.The input of the filter will be matched to 50 ohm 2.The output of the filter will be matched to 50 ohm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document Note - - 2 - C. Frequency Characteristics : 1. S21 Response: (span : 80MHz) Fig1. Horizontal: 8MHz/Div Vertical: 10dB/Div 2. Group-Delay Ripple: (span : 40MHz) Fig2. Horizontal: 4MHz/Div Vertical: 100nec/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 3 - 3. S11 Smith Chart: (span : 80MHz) 4. S22 Smith Chart (span : 80MHz) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 4 - D. Measurement Circuit: J D E. Outline Drawing: 772 Pin J: RF input Pin D: RF output Pin K,E: Case Ground Pin A, B, C, F, G, H: Ground □ : Week Code (W01->A,W02->B,…W27->a,…,W52->z) Unit : mm △ : Product / Year Code Year 2005 2009 2006 2010 2007 2011 2008 2012 Product Code B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 5 - F. PCB Footprint: Unit: mm H. PACKING: 1. REEL DIMENSION Unit: mm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 6 - 2. TAPE DIMENSION Unit: mm 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) I. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 7 -