TAK CHEONG ® SEMICONDUCTOR 200mW SOD-323 SURFACE MOUNT Absolute Maximum Ratings Symbol TA = 25°C unless otherwise noted Parameter PD Power Dissipation T STG Storage Temperature Range Value Units 200 mW -65 to +125 °C TJ Operating Junction Temperature +125 °C VRM Repetitive Peak Reverse Voltage 40 V VR Maximum DC Blocking Voltage 40 V 100 mA 1 A IF(AV) Average Forward Rectified Current Peak Forward Surge Current (8.3mS Single Half-wave) IFSM RB501V-40 Small Outline Flat Lead Plastic Package Schottky Barrier Diode These ratings are limiting values above which the serviceability of the diode may be impaired. Specification Features: Low Forward Voltage Drop Flat Lead SOD-323 Small Outline Plastic Package DEVICE MARKING CODE: Surface Device Type Mounting Device Type RB501V-40 RoHS Compliant Device Marking B4 Green EMC Matte Tin(Sn) Terminal Finish Band Indicates Cathode Electrical Characteristics TA = 25°C unless otherwise noted Parameter Symbol Limits Test Condition Min Unit Max BV Breakdown Voltage IR=500µA IR Reverse Leakage Current VR=10V 30 Forward Voltage IF=10mA 0.340 VF IF=100mA 0.550 TCBAT42WS, 42 Volts µA Volts Number: DB-020 June 2010, Revision F Page 1 TAK CHEONG ® SEMICONDUCTOR 120 30 100 25 Total Capacitance [pF] Io-Forward Current [mA] Typical Characteristics 80 60 40 20 f = 1MHz Ta = 25℃ 20 15 10 5 0 0 0 25 50 75 100 125 150 0 5 10 15 20 25 30 Ambient Temperature [℃ ] VR - Reverse Voltage [V] Figure 1. Forward Current Derating Curve Figure 2. Total Capacitance Figure 3. Forward Characteristics 35 40 Figure 4. Forward Characteristics Number: DB-020 June 2010, Revision F Page 2 TAK CHEONG ® SEMICONDUCTOR SOD-323 Package Outline NOTES: 1. The above package outline is similar to JEITA SC-90. 2. Dimensions are exclusive of Burrs, Mold Flash & Tie Bar extrusions. Number: DB-020 June 2010, Revision F Page 3 TAK CHEONG ® DISC LA I MER NOTIC E NOTICE The information presented in this document is for reference only. Tak Cheong reserves the right to make changes without notice for the specification of the products displayed herein. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Tak Cheong Semiconductor Co., Ltd., or anyone on its behalf, assumes no responsibility or liability for any damagers resulting from such improper use of sale. This publication supersedes & replaces all information reviously supplied. For additional information, please visit our website http://www.takcheong.com, or consult your nearest Tak Cheong’s sales office for further assistance. Number: DB-100 April 14, 2008 / A