FR601 THRU FR607 50V-1000V 6.0A FAST RECOVERY RECTIFIERS Features ! Diffused Junction ! ! ! ! Low Forward Voltage Drop High Current Capability High Reliability High Surge Current Capability Mechanical Data ! ! ! ! ! ! ! Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Weight: 2.1 grams (approx.) Mounting Position: Any Marking: Type Number Epoxy: UL 94V-O rate flame retardant MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings atC25 ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @TA = 55°C Symbol FR601 FR602 FR603 FR604 FR605 FR606 FR607 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 6.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 200 A Forward Voltage @IF = 6.0A VFM 1.2 V @TA = 25°C @TA = 100°C IRM 10 200 µA Peak Reverse Current At Rated DC Blocking Voltage Reverse Recovery Time (Note 2) trr Typical Junction Capacitance (Note 3) Cj 100 pF Operating Temperature Range Tj -65 to +125 °C TSTG -65 to +150 °C Storage Temperature Range 150 250 500 nS *Glass passivated forms are available upon request Note: 1. Leads maintained at ambient temperature at a distance of 9.5mm from the case 2. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. See figure 5. 3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com FR601 THRU FR607 50V-1000V 6.0A FAST RECOVERY RECTIFIERS FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( FR601 THRU FR607 ) 8 6 4 Single Phase Half Wave 60Hz Resistive or Inductive Load 2 600 8.3ms Single Half Sine-Wave (JEDED Method) 500 400 300 200 100 0 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE, ( ) 1 175 10 50 NUMBER OF CYCLES AT 60Hz 100 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD FIG. 4 - TYPICAL JUNCTION CAPACITANCE 200 500 JUNCTION CAPACITANCE, (pF) INSTANTANEOUS FORWARD CURRENT, (A) CHARACTERISTICS 1000 100 40 10 TJ = 25 Pulse Width=300uS 1% Duty Cycle 1 100 60 40 20 10 TJ = 25 6 4 2 0 1 .6 .8 1.0 1.2 1.4 1.6 1.8 .1 2.0 .2 INSTANTANEOUS FORWARD VOLTAGE, (V) .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, ( V ) FIG. 5 - TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 50 NONINDUCTIVE 10 NONINDUCTIVE trr +0.5A 25 Vdc (approx) (-) (-) D.U.T (+) PULSE GENERATOR (NOTE 2) 1 NONINDUCTIVE OSCILLOSCOPE (NOTE 1) 0 -0.25A (+) -1.0A 1cm NOTES:1 Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF. 2. Rise Time = 10ns max. Source Impedance = 50 ohms. E-mail: [email protected] 2 of 2 SET TIME BASE FOR 50/100 ns/cm Web Site: www.taychipst.com