PR3001 THRU PR3005 50V-600V 3.0A FAST RECOVERY RECTIFIER FEATURES · · · · · · Diffused Junction Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 150 A Peak Low Reverse Leakage Current Plastic Material: UL Flammability Classification Rating 94V-0 MECHANICAL DATA · · · · · Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Weight: 1.12 grams (approx.) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 90°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage Symbol PR 3001 PR 3002 PR 3003 PR 3004 PR 3005 Unit VRRM VRWM VR 50 100 200 400 600 V VR(RMS) 35 70 140 280 420 V IO 3.0 A IFSM 150 A @ IF = 3.0A VFM 1.2 V @ TA = 25°C @ TA = 100°C IRM 5.0 100 mA Reverse Recovery Time (Note 3) trr Typical Junction Capacitance (Note 2) Cj 50 pF RqJA 15 K/W Tj, TSTG -65 to +150 °C Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 150 250 ns 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Measured with IF =0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com PR3001 THRU PR3005 50V-600V 3.0A FAST RECOVERY RECTIFIER 4 Single phase half wave Resistive or Inductive load 3 2 1 0 0 25 50 75 100 125 150 PR3001 THRU PR3005 10 IF, INSTANTANEOUS FOWRARD CURRENT (A) I(AV), AVERAGE FWD RECTIFIED CURRENT (A) RATINGS AND CHARACTERISTIC CURVES 1.0 0.1 Tj = 25°C Pulse width = 300µs 0.01 0.6 175 200 1.0 100 PR3001 - PR3004 100 Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 0.8 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics A, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Derating Curve Tj = 25°C f = 1.0MHz PR3005 10 1 10 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 100 1 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance trr 50Ω NI (Non-inductive) (-) 10Ω NI Device Under Test (+) +0.5A (-) Pulse Generator (Note 2) 50V DC Approx 1.0Ω NI Oscilloscope (Note 1) 0A -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit E-mail: [email protected] 2 of 2 Web Site: www.taychipst.com