Data Sheet:
The H-HDMI-IP unit is a High Definition Video / Audio over IP
transport system for HDMI, DVI, or VGA signals. With this unit
you can stream an HDMI, DVI, or VGA signal to anywhere in
the world over the Internet or other IP based Ethernet network.
Use with wireless networking equipment to multicast HDMI
wirelessly to as many display units as you want. You can also
view the stream on a computer via software such as VLC Player. While lower quality units use JPEG
encoding, our H-HDMI-IP encoder features H264 encoding which uses less than half the bandwidth of
MPEG-2 and produces the best picture quality available. The H-HDMI-IP unit offers broadcast quality
encoding with a low time delay, typically around 200 ms. Our system offers an optional USB port on
the encoder that lets you save the output stream to an attached USB storage device. The unit
features an integrated web server for remote management and monitoring. The H-HDMI-IP system is
perfect for anyone who wants to transport or multicast an HDMI, DVI, or VGA source.
Typical H-HDMI-IP Application
Technical Specifications
Video Bit Rate:
Output Video Format:
Coding Grade:
Frame Rate:
Video Sampling Fq:
Audio Rate:
Mode of Encoding:
5 – 15 Mbps
HDMI, DVI, VGA, Component
[email protected] [email protected]
[email protected] [email protected]
[email protected] [email protected]
[email protected]
ISO/IEC-14496-10 H.264
NTSC 30 fps, PAL 25 fps
VGA 30 fps, HDMI 30 fps
32K, 44.1K, 48K
32K, 48K, 56K, 128K, 192K, 384Kps
AAC-LC, G.711 etc
Mode of Audio
Input of Video
Communication Interface:
Network Interface:
Operating Temp:
Storage Temp:
Operating Humidity:
Storage Humidity:
Power Requirements:
Power Consumption:
Mono or Stereo
HDMI, VGA, Component
RS485, RS232
10/100M Ethernet RJ45
-15 – 50 (°C)
-40 – 75 (°C)
0 – 90 (%)
0 – 90 (%)
12 VDC
3.6 W
Data Sheet: H-HDMI-IP