THOR SDI-RX

Data Sheet:
F-xASI/SDI-Tx/Rx
The F-xASI/SDI is a copper to fiber
media adapter for either DVB-ASI or
SD-SDI signals. The unit has up to
eight channels that work independently
of each other. Each channel can carry
either a DVB-ASI signal or an SD-SDI signal. Up to eight channels are then multiplexed onto a single
fiber for transport. Our units employ CWDM technology for optical multiplexing. Based on users needs
a variety of wavelenghts can be used for the transmitter optics. All transmittion signals are multiplexed
onto a single fiber for transport. The signals are then separated at the receiver. The F-xASI/SDI
provides up to 8 independent DVB-ASI/SDI pipes. There are BNC connectors for the copper inputs
and outputs. The optical connections can be configured for SC, SC(APC), ST, or FC connectors. The
F-xASI/SDI features easy to read diagnostic LED's for system and link status.
Typical L-xASI/SDI-Rx/Tx Application
Up to 120Km Singlemode Fiber
ASI or SDI Out
ASI or SDI In
Technical Specifications
Applications:
Optical Wavelength
Optical Output Power
Optical Budget loss
Optical Return Loss
SMPTE 259M, SDI or D1
SMPTE 31 OM, MPEG2
SMPTE 305 540 Mbps
HDTV
Video On Demand TS
MPEG Encoder
DVB-ASI
ASI 0.5Mbps – 622Mbps
1310 – 1550 nm FP/DFB
6.0 dbm
24 – 32 dB
40 dB
Power Consumption
Power Connection
Optical Connector
Copper Connections
Dimensions (H x W x D)
Weight
Operating Temp. (Ԩ)
Storage Temp. (Ԩ)
Operating Humidity (%)
Storage Humidity (%)
Regulatory Compliance
8W
110-240 V Auto Sense
SC/APC or by request
BNC, 75 ohm
19in x 11.0in x 1.75in
480mmX225mmX44mm
0.75 Kg
0 to +50 (Ԩ)
-20 to +70 (Ԩ)
0 to 90 %
0 to 90 %
FCC Part 15 Class A
CE, UL, CUL, TUV
Data Sheet: F-xASI/SDI-Tx/Rx
www.thorfiber.com