UNISONIC TECHNOLOGIES CO., LTD 2N3906 PNP EPITAXIAL PLANAR TRANSISTOR GENERAL PURPOSE APPLIATION FEATURES * Collector-Emitter Voltage: VCEO=40V * Collector Dissipation: Pc(MAX)=625mW * Complementary to UTC 2N3904 1 TO-92 ORDERING INFORMATION Ordering Number Package Lead Free Halogen Free 2N3906L-T92-B 2N3906G-T92-B TO-92 2N3906L-T92-K 2N3906G-T92-K TO-92 2N3906L-T92-R 2N3906G-T92-R TO-92 Note: Pin Assignment: E: EMITTER B: BASE C: COLLECTOR www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., LTD Pin Assignment 1 2 3 E B C E B C E B C Packing Tape Box Bulk Tape Reel 1 of 3 QW-R201-028, C 2N3906 PNP EPITAXIAL PLANAR TRANSISTOR ABSOLUTE MAXIMUM RATING ( TA=25°С, unless otherwise specified ) PARAMETER SYMBOL RATINGS UNIT Collector-Base Voltage VCBO -40 V Collector-Emitter Voltage VCEO -40 V Emitter-Base Voltage VEBO -5 V Collector Current IC -200 mA Base Current IB -50 mA Collector dissipation PC 625 mW Junction Temperature TJ 125 °С Operating Temperature TOPR -20 ~ +85 °С Storage Temperature TSTG -40 ~ +150 °С Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TA=25°С, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS Collector Cut-Off Current ICEX VCE=-30V, VEB=-3V Base Cut-Off Current IBL VCE=-30V, VEB=-3V Collector-Base Breakdown Voltage VCBO IC=-10μA, IE=0 Collector-Emitter Breakdown Voltage VCEO IC=-1mA, IB=0 (Note) Emitter-Base Breakdown Voltage VEBO IE=-10μA, IC=0 VCE=-1V, IC=-0.1mA hFE1 hFE2 VCE=-1V, IC=-1mA DC Current Gain (Note) hFE3 VCE=-1V, IC=-10mA hFE4 VCE=-1V, IC=-50mA hFE5 VCE=-1V, IC=-100mA Collector-Emitter Saturation Voltage VCE(SAT)1 IC=-10mA, IB=-1mA (Note) VCE(SAT)2 IC=-50mA, IB=-5mA VBE(SAT)1 IC=-10mA, IB=-1mA Base-Emitter Saturation Voltage VBE(SAT)2 IC=-50mA, IB=-5mA Transition Voltage fT VCE=-20V, IC=-10mA, f=100MHz Output Capacitance COB VCB=-5V, IE=0, f=1MHz Turn On Time tON VCC=-3V, VBE=-0.5V, IC=-10mA, IB1=-1mA Turn Off Time tOFF IB1=1B2=-1mA Note: Pulse test: PW<=300μs, Duty Cycle<=2% UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN -40 -40 -6 60 80 100 60 30 -0.65 TYP MAX UNIT -50 nA -50 nA V V V 300 -0.25 -0.4 -0.85 -0.95 250 4.5 70 300 V V MHz pF ns ns 2 of 3 QW-R201-028, C 2N3906 PNP EPITAXIAL PLANAR TRANSISTOR TYPICAL CHARACTERISTICS Voltage, V(V) Voltage, V(V) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R201-028, C