UTC-IC 4052L-D16-T

UNISONIC TECHNOLOGIES CO., LTD
4052
CMOS IC
DIFFERENTIAL 4-CHANNEL
ANALOG MULTIPLEXERS/
DEMULTIPLEXERS
„
DESCRIPTION
The UTC 4052 is differential 4-channel analog multiplexers/
demultiplexers for application as digitally–controlled analog switches.
The device has two binary control inputs and an inhibit input. It
feature low ON impedance and very low OFF leakage current.
Control of analog signals up to the complete supply voltage range
can be achieved.
„
FEATURES
* Wide Analog Voltage Range: VDD–VEE = 3V~18V.
(Note: VEE must be≦VSS)
* Break-Before-Make Switching Eliminates Channel Overlap.
* Linearized Transfer Characteristics
* Implement an DP4T Switch Effectively.
* Pin to Pin Replacement for CD4052
„
ORDERING INFORMATION
Ordering Number
Lead Free
4052L-D16-T
4052L-P16-R
4052L-P16-T
4052L-S16-R
4052L-S16-T
Halogen Free
4052G-D16-T
4052G-P16-R
4052G-P16-T
4052G-S16-R
4052G-S16-T
www.unisonic.com.tw
Copyright © 2012 Unisonic Technologies Co., LTD
Package
Packing
DIP-16
TSSOP-16
TSSOP-16
SOP-16
SOP-16
Tube
Tape Reel
Tube
Tape Reel
Tube
1 of 6
QW-R502-013.E
4052
CMOS IC
„
PIN CONFIGURATION
„
PIN DESCRIPTION
PIN No.
SYMBAL
NAME AND FUNCTION
13, 3
X,Y
Commons Input/Output
6
INH
Inhibit Input
7
VEE
Supply Voltage
8
VSS
Ground
10,9
A,B
Binary Control Inputs
12,14,15,11
X0~X3
X Channel Inputs/Outputs
1,5,2,4
Y0~Y3
Y Channel Inputs/Outputs
16
VDD
Positive Supply Voltage
Note: Control Inputs referenced to VSS. Analog Inputs and Outputs reference to VEE. VEE must be <VSS.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 6
QW-R502-013.E
4052
„
CMOS IC
ABSOLUTE MAXIMUM RATING
PARAMETER
DC Supply Voltage (Referenced to VEE, VSS≧VEE)
SYMBOL
VDD
RATINGS
-0.5 ~ +18
UNIT
V
Input or Output Voltage (DC or Transient)
VIN, VOUT
-0.5 ~ VDD +0.5
V
(Referenced to VSS for Control Inputs and VEE for Switch I/O)
Input Current (DC or Transient), per Control Pin
IIN
±10
mA
Switch Through Current
ISW
±25
mA
Power Dissipation
700
mW
PD
Derating above 65°C
7
mW/°C
Junction Temperature
TJ
125
°C
Operating Temperature
TOPR
-40 ~ +125
°C
Storage Temperature
TSTG
-40 ~ +150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified.)
PARAMETER
SYMBOL
TEST CONDITIONS
SUPPLY REQUIREMENTS (Voltages Referenced to VEE)
VDD – 3≧VSS≧VEE
Power Supply Voltage Range
VDD
VDD=5V
Control Inputs: VIN = VSS or VDD
Quiescent
Current
per
Switch I/O: VEE ≦VI/O ≦VDD,
VDD=10V
IQ
Package
and ΔVSW≦500mV(Note 2)
VDD=15V
MIN
www.unisonic.com.tw
MAX UNIT
3
18
0.005
5
0.010
10
0.015
20
(0.07 µA/kHz) f + IQ
(0.20 µA/kHz) f + IQ
(0.36 µA/kHz) f + IQ
V
µA
µA
µA
µA
µA
µA
VDD
VPP
600
mV
10
250
120
80
25
10
10
1050
500
280
70
50
45
µV
Ω
Ω
Ω
Ω
Ω
Ω
±0.05
±100
nA
Total
Supply
Current VDD=5V
TA=25°C only (The channel
(Dynamic Plus Quiescent, VDD=10V
ID(AV) component, (VIN-VOUT)/RON,
Per Package)
is excluded.)
VDD=15V
SWITCHES IN/OUT AND COMMONS OUT/IN -- X, Y, Z (Voltages Referenced to VEE)
Recommended Peak to Peak Voltage
VI/O
Channel On or Off
0
Into or Out of the Switch
Recommended Static or Dynamic
ΔVSW Channel On
0
Voltage Across the Switch (Note2)
Output Offset Voltage
VO(OFF) VIN = 0V, No Load
ΔVSW≦500mV (Note2)
VDD=5V
ON Resistance
VDD=10V
RON
VIN = VIL or VIH (Control), and
VIN = 0 to VDD (Switch)
VDD=15V
ΔON Resistance Between VDD=5V
ΔRON
Any Two Channels in the VDD=10V
Same Package
VDD=15V
VIN = VIL or VIH (Control) Channel to
Channel or Any One Channel,
Off Channel Leakage Current
IOFF
VDD=15V
Capacitance, Switch I/O
CI/O
Inhibit = VDD
Capacitance, Common O/I
CO/I
Inhibit = VDD
Pins Not Adjacent
Capacitance, Feedthrough
CI/O
(Channel Off)
Pins Adjacent
CONTROL INPUTS – INHIBIT A, B, C (Voltages Referenced to VSS)
VDD=5V
Low Level Input Voltage
VDD=10V
RON= per spec, IOFF = per spec
VIL
VDD=15V
VDD=5V
3.5
High Level Input Voltage
VDD=10V
RON= per spec, IOFF = per spec
7.0
VIH
VDD=15V
11
Input Leakage Current
ILEAK VIN= 0 or VDD, VDD=15V
Input Capacitance
CIN
UNISONIC TECHNOLOGIES CO., LTD
TYP
10
17
0.15
0.47
pF
pF
pF
2.25
1.5
4.50
3.0
6.75
4.0
2.75
5.50
8.25
±0.00001 ±0.1
5.0
7.5
V
V
V
V
V
V
µA
pF
3 of 6
QW-R502-013.E
4052
„
CMOS IC
DYNAMIC ELECTRICAL CHARACTERISTICS
(CL = 50pF, TA=25°C, VEE≦VSS, unless otherwise specified)
VDD-VEE
TEST CONDITIONS
MIN TYP MAX UNIT
PARAMETER
SYMBOL
VDC
30
75
ns
5
tPLH, tPHL =(0.17 ns/pF)CL + 21.5ns
Propagation Delay Times
Switch Input to Switch tPLH, tPHL
10
tPLH, tPHL =(0.08 ns/pF)CL + 8.0ns
12
30
ns
Output (RL = 10 kΩ)
15
tPLH, tPHL =(0.06 ns/pF)CL + 7.0ns
10
25
ns
300
600
ns
5
(RL=10kΩ, VEE=VSS)
tPHZ, tPLZ
Output “1” or “0” to High Impedance,
Inhibit to Output
10
155
310
ns
tPZH, tPZL
or High Impedance to “1” or “0” Level
15
125
250
ns
5
325
650
ns
Control Input to Output
tPLH, tPHL
10
RL = 10 kΩ, VEE = VSS
130
260
ns
15
90
180
ns
Total Harmonic Distortion
THD
10
RL = 10KΩ, f = 1 kHz, VIN = 5 VPP
0.07
%
RL = 1kΩ, VIN = 1/2 (VDD–VEE) p–p,
17
MHz
Bandwidth
BW
10
CL = 50pF, 20 Log (VOUT/VIN) = -3dB)
RL=1KΩ, VIN = 1/2 (VDD–VEE) p–p
Off Channel Feedthrough
10
-50
dB
Attenuation
fIN = 30MHz
RL = 1kΩ, VIN = 1/2 (VDD–VEE) p–p
-50
dB
Channel Separation
10
fIN = 3MHz
R1 = 1kΩ, RL = 10kΩ Control
Crosstalk, Control Input to
10
75
mV
Common O/I
tTLH = tTHL = 20ns, Inhibit = VSS
Note: 1. Data of “TYP” is intended as an indication of the IC’s potential performance.
2. For voltage drops across the switch(ΔVSW)>600mV (>300mV at high temperature), excessive VDD current
may be drawn, i.e. the current out of the switch may contain both VDD and switch input components. The
reliability of the device will be unaffected unless the Maximum Ratings are exceeded.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 6
QW-R502-013.E
4052
„
CMOS IC
TEST CIRCUIT
VDD
VDD
VDD
OUT/IN
IN/OUT
VEE
VDD
LEVEL
CONVERTED
CONTROL
OUT/IN
IN/OUT
CONTROL
VEE
Switch Circuit Schematic
„
TRUTH TABLE
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 6
QW-R502-013.E
4052
CMOS IC
TYPICAL CHARACTERISTICS
"ON" Resistance, RON(Ω)
"ON" Resistance, RON(Ω)
"ON" Resistance, RON(Ω)
"ON" Resistance, RON(Ω)
„
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6 of 6
QW-R502-013.E