OCXO C4505 Typical Applications Features Base Stations Test Equipment Synthesizers Digital Switching Surface Mount Package Reflow Process Compatible AT-Cut and SC-Cut Crystal Options Compact Package Previous Vectron Model Numbers OCO700 Frequency range 6 MHz – 60 MHz Standard frequencies 8.192; 10; 12, 12.8; 16.384;20; 32.768; 38.88, 61.44MHz Frequency stabilities1 [AT Cut Crystal – Standard] Parameter vs. operating temperature range (Referenced to +25°C) Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging / day vs. aging / year Warm-up Time Min -50 -100 -100 Min -500 -10 -10 -5.0 -250 Typ Typ Max. +50 +100 +100 Max. +500 +10 +10 +5.0 +250 3 Units ppb ppb ppb Units ppb ppb ppb ppb ppb minutes Operating temp range Ordering Code -20 … +70°C D508 -20 … +70°C D107 F107 -40 … +85°C Condition at time of shipment, nominal EFC VS ± 5% Load ± 5% after 30 days of operation after 30 days of operation to ± 100ppb of final frequency (1 hour reading) @ +25°C Max. +10 +20 +20 Max. +200 +2.0 +5.0 +1.0 +75 3 Units ppb ppb ppb Units ppb ppb ppb ppb ppb minutes Operating temp range Ordering Code -20 … +70°C D108 -20 … +70°C D208 F258 -40 … +85°C Condition at time of shipment, nominal EFC VS ± 5% Load ± 5% after 30 days of operation after 30 days of operation to ± 10ppb of final frequency (1 hour reading) @ +25°C Max. 5.25 Units VDC Frequency stabilities1 [SC Cut Crystal – Option] Parameter vs. operating temperature range (Referenced to +25°C) Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging / day vs aging / year Warm-up Time Min -10 -20 -20 Min -200 -2.0 -5.0 -1.0 -75 Typ Typ Supply voltage (Vs) Parameter Supply voltage [Standard] Min 4.75 Typ 5 Supply voltage [Option] 11.4 12.0 12.6 VDC Supply voltage [Option] 3.135 3.3 3.465 VDC 3.0 1.0 Watts Watts Power consumption Condition Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Ordering Code SV050 SV120 SV033 during warm-up steady state @ +25°C v.2006-11-10 · page 1 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax OCXO C4505 RF output Parameter Signal [Standard] Load Signal Level (Vol) Min Signal Level (Voh) 4.5 3.0 45 Typ Max. Units Condition Ordering Code RFH HCMOS 15 0.5 0.3 Duty cycle 55 pF VDC VDC VDC VDC % with Vs=12.0V or 5.0V and 15pF load with Vs=3.3V and 15pF load with Vs=12.0V or 5.0V and 15pF load with Vs=3.3V and 15pF load @ (Voh-Vol)/2 Frequency Tuning (EFC) Parameter Tuning Range Min Tuning Range ±1.0 ±3.0 Typ Max. Fixed OCXO; No adjust Units Condition Ordering Code 0 ±2.5 ±8 5 ppm ppm with SC Cut Crystal with AT Cut Crystal 1 1 2.0 2.0 1.4 4.0 4.0 2.8 VDC VDC VDC with Vs=5.0VDC with Vs=12VDC with Vs=3.3VDC Min 3.92 4.9 2.75 Typ 4.0 5.0 2.8 Max. 4.08 5.1 2.85 Units VDC VDC VDC Condition with Vs=5.0VDC with Vs=12VDC with Vs=3.3VDC Min Typ ±1.75 ±5.0 Linearity Tuning Slope 5 % Positive Control Voltage Range 0.0 0.0 0.0 Reference Voltage Output (Vref) Parameter Reference Voltage Additional parameters Parameter 3 Phase Noise Phase Noise 3 Weight Processing & Packing Max. -90 -120 -140 -145 -150 -75 -105 -130 -140 -150 14 Handling & processing note Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz g 1 10 100 1 10 1 10 100 1 10 Condition Hz with 10 MHz SC Cut Hz Hz kHz kHz Hz with 10 MHz AT Cut Hz Hz kHz kHz Absolute Maximum Ratings Parameter Supply voltage (Vs) Min Output Load Operable temperature range Storage temperature range -55 -55 Typ Max. 7.0 15.0 7.0 50 +85 +125 Units V V V pF °C °C Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Condition with Vs=5.0VDC with Vs=12VDC with Vs=3.3VDC v.2006-11-10 · page 2 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C4505 OCXO Type A Package Codes: Code A1 Height “H” 15.0 G179 Dimensions: mm Pin Connections 1 2 3 4 5 6 7 RF output GND, Case Control Voltage (Vc) Reference Voltage Output Oven Control Output GND,Case Supply Voltage Vs * Pin 5 must be remain unconnected. Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2006-11-10 · page 3 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax OCXO C4505 Standard Shipping Method Lage im Gurt Position in tape Pin 1 A Abwickelrichtung Unwinding direction X B Gurtunterseite Tape buttom side K P Gurtoberseite Tape upper side *bei W ≤ 24 mm nur untere Lochreihe ∗by W ≤ 24 mm only lower hole line Production tolerance complying DIN IEC 286-3 Enclosure Type Tape width W [mm] Type B and C 44 Quantity per meter 37.5 Quantity per reel 280 Dimension P 32 Recommended Reflow Profile tp Critical Zone Tp TL to Tp Ramp up TL tL Temperature Ts Ramp dow n Ts ts preheat 25 t 25°C to peak Time Pb-Free Assembly /Sn-Pb Assembly Profile Feature Profile Feature Pb-Free Assembly /Sn-Pb Assembly Average ramp-up rate (TL to Tp) 3°C/second max. Time 25°C to Peak Temperature 8 minutes max. Preheat -Temperature Min Tsmin) -Temperature Min Tsmax) -Time (min to max) (ts) 150°c 200°c 60-180 seconds Time maintainted above - Temperature (TL) - Time (tL) 217°C 60-150 seconds Tsmax to TL - Ramp-up Rate 3°C/second max. Time maintainted above - Temperature (TL) - Time (tL) 217°C 60-150 seconds Peak Temperature (Tp) max 260°C Time within 5°C of actual Peak Temperature (tp) Ramp-down Rate 20-40 seconds 6°C/second max. Note: All temperatures refer to topside of the package, measured on the package body surface. Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2006-11-10 · page 4 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax OCXO C4505 How to order this product: Step 1 Use this worksheet to forward the following informations to your factory representative : Model Supply Voltage Code Stability Code C4505 D508 RF Output Code SV050 Step 2 ±50ppb ±100ppb ±100ppb ±10ppb ±20ppb ±20ppb Frequency Control/ Enable Frequency A1 1 6MHz RFH Vs.operat. Temp. Range D508: D107: F107: D108: D208: F258 Package Code Signal: -20…+70°C -20…+70°C -40…+85°C -20…+70°C -20…+70°C -40…+85°C Tuning Range: RFH: HCMOS 0: Fixed OCXO; No adjust 1: ±1.0 ppm .. ±2.5 ppm(SC) 1: ±3.0 ppm .. ±8.0 ppm(AT) Supply: Enclosure: SV050: 5V SV033: 3.3V SV120: 12V A1: G179 The factory representative will then respond with a Vectron Model Number in the following configuration: Model Package Code Dash Dash Number C4505 [Customer Specified Package Code] - [Factory Generated 4 digit number] Typical P/N = C4505A1-0001 Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2006-11-10 · page 5 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax