UNISONIC TECHNOLOGIES CO., LTD U74LVC2G14 CMOS IC DUAL SCHMITT-TRIGGER INVERTER WITH 5V TOLERANT INPUT 5 6 4 1 DESCRIPTION FEATURES 6 5 * Operate From 1.65V to 5.5V * 5V Tolerant Input/Output for Interfacing with 5V logic *±24mA Output Drive (VCC =3.3V) * CMOS Low-Power Consumption and High Noise Immunity * Halogen Free 4 1 2 3 SOT-26 ORDERING INFORMATION Ordering Number U74LVC2G14G-AL6-R U74LVC2G14G-AG6-R Package SOT-363 SOT-26 U74LVC2G14G-AL6-R (1)Packing Type 3 SOT-363 The UTC U74LVC2G14 is a high-performance, low-power, low-voltage, Si-gate CMOS device which provides two inverters with Schmitt trigger action. It is capable of transforming slowly changed input signals into sharply defined, jitter-free output signals. 2 Packing Tape Reel Tape Reel (1) R: Tape Reel (2)Package Type (2) AL6: SOT-363, AG6: SOT-26 (3)Halogen Free (3) G: Halogen Free MARKING www.unisonic.com.tw Copyright © 2010 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-355.B U74LVC2G14 CMOS IC PIN CONFIGURATION FUNCTION TABLE INPUT(A) L H H=High level L=Low Level OUTPUT(Y) H L LOGIC SYMBOL FUNCTIONAL DIAGRAM 1A 1Y 2A 2Y UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-355.B U74LVC2G14 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL VCC VIN Supply Voltage Input Voltage High-impedance Power-off High State Low State Output Voltage RATINGS -0.5 ~ +6.5 -0.5 ~ +6.5 UNIT V V -0.5 ~ 6.5 V -0.5 ~VCC+0.5 V VOUT VCC or GND Current ICC ±100 mA Continuous Output Current IO ±50 mA Input Clamp Current IIK -50 mA Output Clamp Current IOK -50 mA Storage Temperature TSTG -65 ~ + 150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient SYMBOL SOT-363 SOT-26 RATINGS 259 250 θJA UNIT °C/W RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage SYMBOL VCC Positive-Going Input Threshold Voltage VT+ Negative-Going Input Threshold Voltage VT- Hysteresis Voltage(VT+ - VT-) ΔVT Control Input Voltage Output Voltage VIN VOUT High Level Output Current IOH Low Level Output Current IOL Operating Temperature TEST CONDITIONS VCC=1.65V VCC=2.3V VCC=3V VCC=4.5V VCC=5.5V VCC=1.65V VCC=2.3V VCC=3V VCC=4.5V VCC=5.5V VCC=1.65V VCC=2.3V VCC=3V VCC=4.5V VCC=5.5V High or low state VCC =1.65V VCC =2.3V VCC =3V VCC =3V VCC =4.5V VCC =1.65V VCC =2.3V VCC =3V VCC =3V VCC =4.5V TOPR UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 1.65 0.70 1.00 1.30 1.90 2.20 0.30 0.40 0.60 1.10 1.40 0.30 0.40 0.40 0.60 0.70 0 0 -40 TYP MAX UNIT 5.5 V 1.40 V 1.70 V 2.20 V 3.10 V 3.70 V 0.70 V 1.00 V 1.30 V 2.00 V 2.50 V 0.80 V 0.90 V 1.10 V 1.30 V 1.40 V 5.5 V VCC V -4 mA -8 mA -16 mA -24 mA -32 mA 4 mA 8 mA 16 mA 24 mA 32 mA 85 °C 3 of 5 QW-R502-355.B U74LVC2G14 CMOS IC ELECTRICAL CHARACTERISTICS (Ta=25°C , unless otherwise specified) PARAMETER SYMBOL High-Level Output Voltage VOH Low-Level Output Voltage VOL Input Leakage Current Power OFF Leakage Current II(LEAK) IOFF Quiescent Supply Current IQ Additional Quiescent Supply Current Per Pin ΔIQ Input Capacitance CIN MIN VCC -0.1 1.20 1.90 2.40 2.30 3.80 TYP MAX UNIT V V V V V V 0.10 V 0.45 V 0.30 V 0.40 V 0.55 V 0.55 V ±5 μA ±10 μA 0.1 10 μA 500 μA 4 pF SWITCHING CHARACTERISTICS (see TEST CIRCUIT AND WAVEFORMS) PARAMETER Propagation Delay from Input (nA) to Output(nY) TEST CONDITIONS VCC=1.65~5.5V, IOH=-100uA VCC=1.65V, IOH=-4mA VCC=2.3V, IOH=-8mA VCC=3V, IOH=-16mA VCC=3V, IOH=-24mA VCC=4.5V, IOH=-32mA VCC=1.65~5.5V, IOL =100uA VCC=1.65V, IOL =4mA VCC=2.3V, IOL =8mA VCC=3V, IOL =12mA VCC=3V, IOL =24mA VCC=4.5V, IOL =32mA VCC=0V to 5.5V, VIN=0 or 5.5V VCC=0V, VIN or VOUT=5.5V, VCC=1.65V to 5.5V, IOUT=0 VIN=5.5V or GND VCC=3V to 5.5V One input at VCC-0.6V, Other inputs at VCC or GND, IOUT =0 VCC=3.3V, VIN =VCC or GND SYMBOL tPLH / tPHL TEST CONDITIONS VCC =1.8V±0.15V, VIN=VCC CL=30pF, RL=1KΩ VCC=2.5V±0.2V, VIN=VCC CL=30pF, RL=500Ω VCC =3.3V±0.3V, VIN=3V CL=50pF, RL=500Ω VCC=5V±0. 5V, VIN=VCC CL=50pF, RL=500Ω MIN TYP MAX UNIT 3.90 9.50 ns 1.90 5.70 ns 2.00 5.40 ns 1.5 4.3 ns MIN TYP MAX UNIT 16 pF 17 pF 18 pF 21 pF OPERATING CHARACTERISTICS (Ta=25°С) PARAMETER SYMBOL Power Dissipation Capacitance CPD TEST CONDITIONS VCC=1.8V,f=10MHz VCC=2.5V,f=10MHz VCC=3.3V,f=10MHz VCC=5V,f=10MHz UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R502-355.B U74LVC2G14 CMOS IC TEST CIRCUITS AND WAVEFORMS Inputs VCC 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V 5V±0. 5V VIN VCC VCC 3V VCC tR, tF ≤2ns ≤2ns ≤2.5ns ≤2.5ns VM CL RL VCC/2 VCC/2 1.5V VCC/2 30pF 30pF 50pF 50pF 1kΩ 500Ω 500Ω 500Ω VIN VM VM nA input 0V tPHL tPLH nY output VOH VM VM VOL PROPAGATION DELAY TIMES Note: 1. CL includes probe and jig capacitance. 2. All input pulses are supplied by generators having the following characteristics: PRR≤1MHz, ZO = 50Ω: tR≤2ns, tF ≤2ns (VCC=1.8V±0.15V and VCC=2.5V±0.2V) tR ≤2.5ns, tF ≤2.5ns (VCC =3.3V±0.3V and VCC=5V±0. 5V) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-355.B