UNISONIC TECHNOLOGIES CO., LTD U74LVC1G08 CMOS IC 2-INPUT AND GATE DESCRIPTION The U74LVC1G08 is a 2-input AND gate which provides the Function Y=A*B. This device has power-down protective circuit to prevent device form destruction when it is powered down. FEATURES * Inputs Accept Voltage up to 5.5V * Low Power Current: ICC=10μA(Max) *±24mA Output Drive(VCC=3.3V) * Power Down Protection ORDERING INFORMATION Ordering Number Lead Free Halogen Free U74LVC1G08L-AE5-R U74LVC1G08G-AE5-R U74LVC1G08L-AF5-R U74LVC1G08G-AF5-R U74LVC1G08L-AL5-R U74LVC1G08G-AL5-R Package Packing SOT-23-5 SOT-25 SOT-353 Tape Reel Tape Reel Tape Reel MARKING www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-223.E U74LVC1G08 PIN CONFIGURATION VCC 5 1 A CMOS IC Y 4 2 B 3 GND FUNCTION TABLE (each gate) INPUT A L L H H B L H L H OUTPUT Y L L L H LOGIC DIAGRAM (positive logic) IEC logic symbol UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-223.E U74LVC1G08 CMOS IC ABSOLUTE MAXIMUM RATING (unless otherwise specified)(Note 1) PARAMETER SYMBOL RATINGS UNIT VCC -0.5~6.5 V VIN -0.5~6.5 V -0.5~VCC+0.5 V active mode VOUT Output Voltage power-down mode VOUT -0.5~6.5 V Input Clamp Current (VIN<0) IIK -50 mA Output Clamp Current (VOUT<0) IOK -50 mA Output Current IOUT ±50 mA VCC or GND Current ICC ±100 mA Storage Temperature TSTG -65 ~ +150 °C Note 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. Supply Voltage Input Voltage RECOMMENDED OPERATING CONDITIONS PARAMETER Operating Supply Voltage Data retention only Input Voltage Output Voltage Operating Temperature SYMBOL VCC VIN VOUT TA MIN 1.65 1.5 0 0 -40 TYP MAX 5.5 UNIT V V V V °C 5.5 VCC 85 STATIC CHARACTERISTICS (TA=25℃) PARAMETER SYMBOL High-Level Input Voltage Low-Level Input Voltage High-Level Output Voltage Low-Level Output Voltage Input Leakage Current Power OFF Leakage Current Quiescent Supply Current Additional Quiescent Supply Current Input Capacitance VIH VIL VOH VOL II(LEAK) IOFF IQ ΔIQ CIN TEST CONDITIONS MIN VCC =1.65V~1.95V 0.65*VCC VCC =2.3V~2.7V 1.7 VCC =3.0V~3.6V 2 VCC =4.5V~5.5V 0.7*VCC VCC =1.65V~1.95V VCC =2.3V~2.7V VCC =3.0V~3.6V VCC =4.5V~5.5V VCC =1.65V ~ 5.5V, IOH=-100μA VCC-0.1 VCC =1.65V, IOH=-4mA 1.2 VCC =2.3V, IOH=-8mA 1.9 VCC =3.0V, IOH=-16mA 2.4 VCC =3.0V, IOH=-24mA 2.3 VCC =4.5V, IOH=-32mA 3.8 VCC =1.65V ~ 5.5V, IOL=100μA VCC =1.65V, IOL=4mA VCC =2.3V, IOL=8mA VCC =3.0V, IOL=16mA VCC =3.0V, IOL=24mA VCC =4.5V, IOL=32mA VCC =0V ~ 5.5V, VIN=5.5V or GND VCC =0V, VIN or VOUT=5.5V VCC =1.65V~5.5V, VIN=5.5V or GND IOUT=0 VCC=3V~5.5V,One input at VCC-0.6V, other inputs at VCC or GND VCC =3.3V, VIN=VCC or GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TYP MAX UNIT V 0.35*VCC 0.7 0.8 V 0.3*VCC V 4 0.1 0.45 0.3 0.4 0.55 0.55 ±5 ±10 μA μA 10 μA 500 μA V pF 3 of 5 QW-R502-223.E U74LVC1G08 DYNAMIC CHARACTERISTICS (TA=25℃) PARAMETER Propagation delay from input (A or B) to output(Y) CMOS IC SYMBOL tPLH/tPHL TEST CONDITIONS VCC=1.8V±0.15V, CL=15pF VCC=2.5V±0.2V, CL=15pF VCC=3.3V±0.3V, CL=15pF VCC=5V±0.5V, CL=15pF VCC=1.8V±0.15V, CL=30 or 50pF VCC=2.5V±0.2V, CL=30 or 50pF VCC=3.3V±0.3V, CL=30 or 50pF VCC=5V±0.5V, CL=30 or 50pF MIN 1.5 0.7 0.8 0.8 2.4 1.1 1 1 TYP MAX 7.2 4.4 3.6 3.4 8 5.5 4.5 4 UNIT ns ns ns ns ns ns ns ns MIN TYP 21 24 26 31 MAX UNIT pF pF pF pF OPERATING CHARACTERISTICS (TA=25℃) PARAMETER Power Dissipation Capacitance SYMBOL CPD TEST CONDITIONS VCC=1.8V, f=10MHz VCC=2.5V, f=10MHz VCC=3.3V, f=10MHz VCC=5V, f=10MHz UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R502-223.E U74LVC1G08 CMOS IC TEST CIRCUIT AND WAVEFORMS Note: CL includes probe and jig capacitance. VCC 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V 5V±0.5V 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V 5V±0.5V VIN VCC VCC 3V VCC VCC VCC 3V VCC tR,/tF ≤2ns ≤2ns ≤2.5ns ≤2.5ns ≤2ns ≤2ns ≤2.5ns ≤2.5ns VM VCC/2 VCC/2 1.5V VCC/2 VCC/2 VCC/2 1.5V VCC/2 VLOAD 2* VCC 2* VCC 6V 2* VCC 2* VCC 2* VCC 6V 2* VCC CL 15pF 15pF 15pF 15pF 30pF 30pF 50pF 50pF RL 1MΩ 1MΩ 1MΩ 1MΩ 1KΩ 500Ω 500Ω 500Ω V△ 0.15V 0.15V 0.3V 0.3V 0.15V 0.15V 0.3V 0.3V UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-223.E