915.00 MHz SAW Filter • Designed to PHS Handset Phone Selectivity in 915.00 MHz • Low-Loss, Coupled-Resonator Quartz Design • Simple External Impedance Matching • Ultra Miniature Ceramic DCC6 SMD Package • Complies with Directive 2002/95/EC (RoHS Compliant) SF5006 Absolute Maximum Rating (Ta=25°C) Parameter Rating Unit Input Power Level Pin 10 dBm DC Voltage VDC Between Any Two Pins VDC 12 V Operating Temperature Range TA -10 ~ +65 °C Storage Temperature Range Tstg -40 ~ +85 °C Electronic Characteristics Parameter Sym Minimum Typical Maximum Unit fC NS 915.00 NS MHz IL - 3.5 5.0 dB BW3 - 26.0 - MHz ∆α - 1.5 - dB 25 27 - dB 30 35 - dB 950.00 … 1080.0 MHz 30 40 - dB 1080.0 … 2000.0 MHz 20 25 - dB |fA| - - 10 ppm/yr - 1.0 - - MΩ Nominal Frequency (at 25°C) (Center frequency between 3dB point) Insertion Loss 902.00 … 928.00 MHz 3dB Passband Inband Ripple 902.00 … 928.00 MHz Absolute Attenuation DC … 800.00 MHz 800.00 … 880.00 MHz Frequency Aging Absolute Value during the First Year DC Insulation Resistance Between any Two Pins αrel NS = Not Specified Notes: 1. The frequency fC is defined as the midpoint between the 3dB frequencies. 2. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50Ω test system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fC. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. 3. Unless noted otherwise, specifications apply over the entire specified operating temperature range. Phone: +86 (10) 5820-3910 © 2007 by Vanlong Technology Co., Ltd. Fax: +86 (10) 5820-3915 4. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. 5. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 6. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. 7. For questions on technology, prices and delivery please contact our sales offices or e-mail [email protected]. Email: [email protected] Web: http://www.vanlong.com SF5006 915.00 MHz SAW Filter Package Dimensions (DCC6) Electrical Connections Terminals 2 5 1,3,4,6 Connection Input Output Ground Package Dimensions Dimensions A B C D Marking Nom (mm) 1.90 0.64 1.00 1.27 Dimensions E F G Nom (mm) 3.80 3.80 1.20 Test Circuit 1. F5006 - Part Code F5006 915.0 YWW 2. Frequency (MHz) in 5 digits 3. Date Code: From 50Ω source To 50Ω load Y : Last digit of year WW : Week No. Typical Frequency Response Phone: +86 (10) 5820-3910 © 2007 by Vanlong Technology Co., Ltd. Fax: +86 (10) 5820-3915 Email: [email protected] Web: http://www.vanlong.com SF5006