622.08 MHz SAW Filter • • • • Designed to Band Pass in 622.08 MHz Low-Loss, Coupled-Resonator Quartz Design Simple External Impedance Matching Ultra Miniature Ceramic QCC8C SMD Package SF5701 Absolute Maximum Rating (Ta=25°C) Parameter Rating Unit Input Power Level Pin 10 dBm DC Voltage VDC Between Any Two Pins VDC 12 V Operating Temperature Range TA -10 ~ +60 °C Storage Temperature Range Tstg -40 ~ +85 °C Electronic Characteristics Parameter Sym Minimum Typical Maximum Unit fC NS 622.08 NS MHz Insertion Loss at fC IL - 3.0 4.5 dB Usable Bandwidth BW - ±1.0 - MHz Amplitude Ripple ∆α - - 2.0 dB αrel 45 55 - dB Nominal Frequency (at 25°C) (Center frequency between 3dB point) Absolute Attenuation 622.08 … 602.08 MHz 25 30 - dB |fA| - - 10 ppm/yr DC Insulation Resistance Between any Two Pins - 1.0 - - MΩ Input / Output Impendance (nominal) - - 150//0 - Ω//pF 622.08 … 627.08 MHz Frequency Aging Absolute Value during the First Year NS = Not Specified Notes: 1. The frequency fC is defined as the midpoint between the 3dB frequencies. 2. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50Ω test system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fC. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. 3. Unless noted otherwise, specifications apply over the entire specified operating temperature range. Phone: +86 10 6301 4184 © 2003 by Vanlong Technology Co., Ltd. Fax: +86 10 6301 9167 4. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. 5. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 6. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. 7. For questions on technology, prices and delivery please contact our sales offices or e-mail [email protected]. Email: [email protected] Web: http://www.vanlong.com S F 5 7 01 622.08 MHz SAW Filter Package Dimensions (QCC8C) Electrical Connections Terminals 1 2 5 6 3,7 4,8 Connection Input Input Ground Output Output Groud To be Grounded Case Ground Package Dimensions Dimensions A B C D Marking Nom (mm) 2.08 0.60 1.27 2.54 Dimensions E F G H Nom (mm) 1.20 1.35 5.00 5.00 Test Circuit 1. F5701 - Part Code F5701 2. Frequency (MHz) in 5 digits 622.08 3. Date Code: YWW 100Ω From 50Ω source 100Ω To 50Ω load Y : Last digit of year WW : Week No. Typical Frequency Response Phone: +86 10 6301 4184 © 2003 by Vanlong Technology Co., Ltd. Fax: +86 10 6301 9167 Email: [email protected] Web: http://www.vanlong.com S F 5 7 01