FM4001M thru FM4007M Surface Mount Standard Recovery Glass Passivated Rectifiers REVERSE VOLTAGE 50 TO 1000 VOLTS FORWARD CURRENT 1.0 AMPERE Features: *For Surface Mount Application *Glass Passivated Chip *Low Reverse Leakage Current *Low Forward Voltage Drop And High Current Capability *Plastic Meterial Has UL Flammability Classification 94V-0 Mechanical Data: * Case: Molded Plastic, MINI-SMA(Similar to SOD-123F) * Terminals: Solder Plated, Solderable per ML-STD-750 Medthod 2026 * Polarity: Indicated by Cathode Band * Wight: 0.040 grams MINI-SMA (SOD-123F) MINI-SMA Outline Dimension B unit:mm C MINI-SMA A J H WEITRON http://www.weitron.com.tw Dim Min Max A B 1.40 1.80 3.50 3.90 C H - 0.30(TYP) - 0.70(TYP) J 1.30 1.70 H 1/3 Rev.A 31-Aug-09 FM4001M thru FM4007M Maximum Ratings and Electrical Characteristics Rating 25 C Ambient Temperature Unless Otherwise Specified. Single Phase Half Wave, 60Hz , Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%. Symbol FM FM FM FM FM FM FM 4001M 4002M 4003M 4004M 4005M 4006M 4007M Characteristics Unit Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TA=75 C IF(AV) 1.0 A IFSM 30 A VF 1.10 V Peak Forward Surge Current, 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Instantaneous At 1.0A DC Maximum DC Reverse Current @TA=25 C 5.0 IR At Rated DC Blocking Voltage @TA=100 C Typical Junction Capacitance (Note 1) uA 50 15(TYP) PF 60(TYP) C/W Operating Temperature Range CJ R JA TJ -55 to+150 C Storage Temperature Range TSTG -55 to+150 C Typical Thermal Resistance (Note 2) NOTES: 1.Measured at 1.0MHz applied reverse voltage of 4.0V DC. 2.Thermal Resistance Junction to Ambient. Device Marking Item Marking Item Marking FM4001M A1 FM4005M A5 FM4002M A2 FM4006M A6 FM4003M A3 FM4007M A7 FM4004M A4 WEITRON http://www.weitron.com.tw 2/3 Rev.A 31-Aug-09 FM4001M thru FM4007M FIG.1-TYPICAL FORWARD CHARACTERISTICS AVERAGE FORWARD CURRENT,(A) FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE INS TANTANEOUS FORWARD CURRENT,(A) 50 10 3.0 1.0 1.2 1.0 0.8 Single Phase 0.6 Half Wave 60Hz Resistive Or Inductive Load 0.4 0.2 0 0 20 40 60 80 100 120 140 160 180 200 Tj=25 C AMBIENT TEMPERATURE ( C) Pulse Width 300us 1% Duty Cycle 0.1 .01 .6 .7 .8 .9 1.0 1.1 1.2 1.3 FORWARD VOLTAGE,(V) FIG.3 - TYPICAL REVERSE CHARACTERISTICS PEAK FORWAARD S URGE CURRENT,(A) FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 100 50 40 30 8.3ms Single Half Tj=25 C Sine Wave 20 JEDEC method 10 0 1 5 50 10 100 NUMBER OF CYCLES AT 60Hz FIG.5-TYPICAL JUNCTION CAPACITANCE Tj=100 C 35 JUNCTION CAPACITANCE,(pF) REVERS E LEAKAGE CURRENT, (mA) 10 1.0 Tj=25 C .1 30 25 20 15 10 5 .01 0 20 40 60 80 100 120 140 0 .01 .05 .1 .5 1 5 10 50 100 PERCENTAGE RATED PEAK REVERSE VOLTAGE REVERSE VOLTAGE,(V) WEITRON http://www.weitron.com.tw 3/3 Rev.A 31-Aug-09