P13003 H SB SBP 13003H High Voltage Fast -Switching NPN Power Transistor Features � Very High Switching Speed � High Voltage Capability � Wide Reverse Bias SOA General Description This Device is designed for high voltage , High speed Switching characteristics required such as lighting system, switching mode power supply. Absolute Maximum Ratings Symbol Value Units VCES Collector-Emitter Voltage Parameter Test Conditions VBE=0 900 V VCEO Collector-Emitter Voltage IB=0 530 V VEBO Emitter-Base Voltage IC=0 9.0 V IC Collector Current 1.5 A ICP Collector pulse Current 3.0 A IB Base Current 0.75 A IBM Base Peak Current 1.5 A PC Total Dissipation at Tc=25℃ 30 W TJ Operation Junction temperature -40~150 ℃ TSTG Storage Temperature -40~150 ℃ tP=5ms Tc:Case temperature(good cooling) Thermal Characteristics Symbol RQJA Parameter Thermal Resistance Junction to Ambient Rev.A Aug.2010 Copyright@Winsemi Microelectronics Co., Ltd., All right reserved. value Units 13.6 ℃/W P13003 H SB SBP 13003H Electrical Characteristics(Tc=25℃ Symbol unless otherwise noted) Parameter Test Conditions VCEO(sus) Collector-Emitter Breakdown Voltage VCE(sat) Collector-Emitter Saturation Voltage Ic=10mA,Ib=0 Value Min Typ Max 530 - - Ic=0.5A,Ib=0.1A 0.5 - - - - Ic=0.5A,Ib=0.1A Base -Emitter Saturation voltage V 1.5 Vcb=900V ICBO 1.0 1.0 Ic=1.0A,Ib=0.25A Collector Base Cutoff Current 1.0 - hFE mA Vcb=900V,Tc=100℃ (Vbe=-1.5v) V V Ic=1.0A,Ib=0.25A VBE(sat) Units 5.0 Vce=10V,Ic=0.4A 20 - 35 Vce=10V,Ic=1A 6 - 35 0.25 1.0 1.32 3.0 0.23 0.4 - 1.2 4.0 - 0.12 0.3 - 1.8 5.0 - 0.16 0.4 DC Current Gain Resistive Load ton Turn-on Time ts Storage time tf Fall Time VCC=125V,Ic=1A IB1=0.2A,IB2=-0.5A Tp=25µs Inductive Load ts Storage Time tf Fall Time VCC=15V,Ic=1A IB1=0.2A,IB2=-0.5A L=0.35mH,Vclamp=300V Inductive Load ts Storage Time tf Fall Time VCC=15V,Ic=1A IB1=0.2A,IB2=-0.5A L=0.35mH,Vclamp=300V Tc=100℃ µs - µs µs Note: Pulse Test : Pulse width 300,Duty cycle 2% 2/5 Steady, keep you advance P13003 H SB SBP 13003H Fig.1DC Current Gain Fig.3 Collector-Emitter Saturation Voltage Fig.5 Static Characteristics Fig.2 Base -Emitter Saturation Voltage Fig.4 Safe Operation Area Fig.6 Power Derating 3/5 Steady, keep you advance P13003 H SB SBP 13003H Resistive Load Switching Test Circuit Inductive Load Switching & RBSOA Test Circuit 4/5 Steady, keep you advance P13003 H SB SBP 13003H To220 Package Dimension To-220 Unit:mm 5/5 Steady, keep you advance