1 2 3 4 5 TECHNICAL CHARACTERISTICS MATERIAL INSULATOR: LCP FLAMABILITY RATING: UL94-V0 COLOR: BLUE CONTACT MATERIAL: PHOSPHORE BRONZE CONTACT TYPE: STAMPED CONTACT PLATING: UNDERPLATE 1.27 to 2.54 µm Ni CONTACT AREA 0.76 µm Gold SOLDER TAIL AREA 2.54 to 5.08 µm Matt Tin SHIELDING: BRASS BRIGHT TIN PLATED A ENVIRONMENTAL OPERATING TEMPERATURE: -20 up to +85°C COMPLIANCE: RoHS & LEAD FREE AS PER DIRECTIVE 2002/95/EC HALOGEN FREE COMPLIANT AS PER IEC 61249-2-21 ELECTRICAL CURRENT RATING: - PIN 1 & PIN 4 (Vbus & corresponding ground PIN) 1.8A Max - OTHER PINS 0.25 A min WORKING VOLTAGE: 30Vac DIELECTRIC WITHSTANDING VOLTAGE: 100Vac/min INSULATION RESISTANCE: > 100MΩ CONTACT RESISTANCE: - PIN 1 & PIN 4: 30mΩ Max - OTHER PINS: 50mΩ Max IMPEDANCE: 90Ω +/- 15Ω @ 50ps RISE TIME (20~80%) B STANDARD CERTIFIED: E323964 / MODEL NUMBER 692112030100 MECHANICAL INSERTION FORCE: 35.0N Max EXTRACTION FORCE: 10.0N min QUALITY CLASS: 5000 MATING CYCLES SOLDERING REFLOW PROCESS ONLY AS PER JEDEC J-STD-020D C PACKAGING TRAY PCB LAYOUT * - COMPONENT VIEW RoHS Compliant * NOTE: THE RECOMMENDED PCB LAYOUT IS FOR AN OPTIMIZED RETENTION FORCE OF CONNECTOR ON PCB BUT IT IMPLIES INSERTION FORCE THAT A LOT OF PICK AND PLACE MACHINES ARE NOT ABLE TO HANDLE. THEREFORE IT MIGHT BE NECESSARY TO DRILL BIGGER HOLES FOR THE CLIPS. PLEASE CHECK THIS CARFULLY. PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C 21-SEP-11 NOTE GG B 10-MAY-11 UL GG A 16-SEP-10 PDF JP SHEET: 1/2 REV DATE FILE BY DRAW: JOE APPROVAL: RJ UNIT: MM DESCRIPTION: USB 3.0 SMT PLUG WITH CLIP TYPE A SIZE WERI PART NO: 692 112 030 100 A4 SCALE: D 1 2 3 4 5 A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: RJ B DESCRIPTION: USB 3.0 SMT PLUG WITH CLIP TYPE A SIZE WERI PART NO: 692 112 030 100 A4 SCALE: SHEET: 2/2 A REV UNIT: MM DATE FILE BY DRAW: JOE D